N7201A616E00_0317.pdf - 第116页

NPM-W 2 EJM7DE-MB-02 O-00 First layer Second layer Third layer Fourth layer 2-2-2 -15 XY unit Compo- nent names Menu configur a tion 8 Operating procedure 2-2-2 Engineer mode 6 Machine menu Setup Configures p arameters .…

100%1 / 714
NPM-W2 EJM7DE-MB-02O-00
First layer Second layer Third layer Fourth layer
2-2-2-14
Configures the defect beam settings
for the XY unit and the time variation
correction settings.
XY unit
Configures optional functions.
Head
Configures the parameters to move
the head vertically.
Checks and configures the defect
head status.
Conveyor
Configures the optional functions of
conveyors.
Configures the parameters.
Feeder
Configures optional functions.
Configures the parameters.
Configures optional functions.
Configures the parameters.
Tray
Configures optional functions.
Configures the optional functions.
Configures parameters of head
up/down actions.
Checks and configures conditions of
a defect head.
Head
(Dispensing
head)
Preparation
Head
camera
Configures the parameters.
NPM-W2 EJM7DE-MB-02O-00
First layer Second layer Third layer Fourth layer
2-2-2-15
XY unit
Compo-
nent
names
Menu configuration 8
Operating procedure
2-2-2
Engineer mode 6
Machine
menu
Setup
Configures parameters.
Configures optional functions.
Height
sensor
Whole
Parameter
Confirms data check results.
Checks the origin offset.
Checks the offset of a reference mark of the
XY unit.
Checks the parameter for the plane
correction of the placement range.
Checks the offset of placement position.
Head
Checks the head rotation center offset.
Checks the offset at each head angle.
Checks the offset of the head origin.
Checks the nozzle changer offset.
Checks the parameter for load control.
(displayed when the 3-nozzle head is installed)
Configures the parameters.
Multi-
recognition
camera
Configures optional functions.
NPM-W2 EJM7DE-MB-02O-00
First layer Second layer Third layer Fourth layer
2-2-2-16
Head
(Dispensing
head)
Checks origin offset.
Checks rotation center offset of a
head.
Checks offset of a head per angle.
Checks height offset of dummy
dispensing.
Checks the origin offset.
Conveyor
Checks PCB control position offset.
Checks pickup position offset.
Feeder
Checks the offsets of squeegee-axis
and transcription position.
Tray
Checks the origin offset.
Checks pickup position offset.
Preparation
Checks the offset correction values
for X-, Y-, and -axes of the camera.
Checks white balance correction
values for the camera.
Checks the amount of correction of
lamp value.
Checks the offset of four-point
position of reference post.
Checks the parameter used to set
plane correction up as the inspection
range.
Inspection
head