N7201A616E00_0317.pdf - 第692页
NPM-W 2 EJM7DE-MB-09O -00 Specifi- cation No zzle specifica tions 5 Dispensing nozzle (option) 1 9-1-6 -9 The dis pensing nozzle h as vario us nozz les depending on applic able component and usage. Operating procedure 9-…
NPM-W2 EJM7DE-MB-09O-00
9-1-6-8
■Operation standard of pickup depth and nozzle length of an electric component
Required nozzle length may vary depending on pickup depth of an electric component
(distance from a top surface of embossed tape to a pickup surface of an electric
component.)
Pickup
depth B
0 to 3 mm or
less
3 to 8 mm or
less
8 to 13 mm or
less
Nozzle
length A
22.5 mm 27.5 mm 32.5 mm
Embossed tape
Component
Nozzle length A
Pickup depth B
At
a glance
1 2 3
●Pickup enabled component:
Diagonal 41 mm(29 29 mm)
*1）
or less and L
35 mm or less
Diagonal 47 mm(33 33 mm)
*1）
or less and L
38 mm or less and t≦14 mm or less
●Pickup enabled component:
Diagonal 76 mm(54 54 mm) or less
and L 65 mm or less
■Pickup component dimensions and nozzle arrangement
( ●: Pickup enabled, ○: Pickup disabled, : #1006 nozzle (Reflector)
*2）
1 2 3
1 2 3
●Pickup enabled component:
Diagonal 152.1 mm or less and L 150 mm or
less and W 90 mm or less
*1) Numerical value in ( ) is an example in the case of L=W.
When pickup position is offset from the center of the component, the component size has restrictions.
Please ask us for details.
*2) Please install #1006 nozzle (reflector) according to the component’s size or shape.
NPM-W2 EJM7DE-MB-09O-00
Specifi-
cation
Nozzle specifications 5
Dispensing nozzle (option) 1
9-1-6-9
The dispensing nozzle has various nozzles depending on applicable component and usage.
Operating procedure
9-1-6
■1-point nozzle
Nozzle No. 7001 7030 7015
Type Dot dispense Dot dispense Draw dispense
*)
Diameter (guide)
Width (guide)
φ0.7 to φ1.1 mm φ0.6 to φ1.0 mm
0.8 to 1.2 mm
Component
(representative
example)
1608R, C
Dispensing adjacent to a rail
1608R, C
Dispensing adjacent to a rail
BGA
CSP
Shape
(Unit: mm)
Nozzle No. 7021 7023 7026
Type Draw dispense
*)
Draw dispense
*)
Draw dispense
*)
Width (guide) 0.6 to 1.0 mm 0.4 to 0.8 mm
0.7 to 1.1 mm
Component
(representative
example)
BGA
CSP
BGA
CSP
BGA
CSP
Shape
(Unit: mm)
*) The above drawing nozzles are examples. It is necessary to review individually about the drawing nozzle
according to the dispensing material and shapes. Please ask us for details. For draw dispense (non-contact
dispending), the height sensor (option) is required.
(A: Outer Diameter B:Inner Diameter)
NPM-W2 EJM7DE-MB-09O-00
9-1-6-10
■2-point nozzle
Nozzle No. 7201 7204 7222
Type Dot dispense Dot dispense Dot dispense
Diameter (guide)
φ0.6 to φ1.0 mm φ0.7 to φ1.1 mm φ0.7 to φ1.1 mm
Component
(representative
example)
1608R, C
to 3216R,C
1608R, C
to 3216R,C
2125R, C
to 3216R,C
Shape
(Unit: mm)
Nozzle No. 7223 7224 7236
Type Dot dispense Dot dispense Dot dispense
Diameter (guide)
φ0.7 to φ1.1 mm φ0.7 to φ1.1 mm φ0.7 to φ1.1 mm
Component
(representative
example)
3216R, C
to 4 x 4 mm
2 x 2 mm
to 4 x 4 mm
2125R, C
to 3216R,C
Shape
(Unit: mm)
(A: Outer Diameter B:Inner Diameter)
At
a glance