N7201A616E00_0317.pdf - 第305页

NPM-W 2 EJM7DE-MB-04 O-00 1 When individually set by component 4-4-4 -2 G H The displayed inspectio n point is set as misjudgment (confo rming). I The displayed inspectio n point is set as nonconforming. J All the undefi…

100%1 / 714
NPM-W2 EJM7DE-MB-04O-00
Wrong judgment input
screen 1
Operating procedure
4-4-4
The wrong judgment screen is displayed when an inspection result turns out to be defective.
The following screen will not be displayed and a defective PCB is unloaded as it is if the soft
switch (→P.4-2-1) for [Over judge check] is OFF.
●Visually check any inspection-NG location displayed on the screen and set it as either nonconforming or
conforming (misjudgment) before resuming production.
A
B
E
Comment
F
Pattern No
C
Lane
D
Comp info
Name of placement component (part name).
■NG image display
■NG MAP display
(Only for component
inspection)
Displays the image at the
time of conforming judgment.
The image of a conforming
item is automatically saved
to LNB if the target
component is judged as OK.
Lane No
Blue frame in the image:
Component position
●When APC is available
Light blue frame in the image
Component position (after APC correction)
Red frame in the image:
Component misalignment tolerance
(when position inspection is enabled)
G
CDE F
H IJA
B
OK Image
(Component inspection /
solder inspection)
Displays the image that
makes a nonconforming
judgment at the moment.
NG image
(Component inspection /
solder inspection)
Displays any NG location on
PCB on the map.
NG MAP
Produc-
tion
4-4-4-1
Over judgment input
Nominator: The order of inspection NGs.
Denominator : The total number of
inspection NGs.
Nominator / Denominator
NPM-W2 EJM7DE-MB-04O-00
1
When individually set by component
4-4-4-2
G
H
The displayed inspection point is set as
misjudgment (conforming).
I
The displayed inspection point is set as
nonconforming.
J
All the undefined inspection-NG points are collectively set as nonconforming.
The batch setting button cannot be used
unless all inspections are complete. In
addition, the display will be refreshed when the next screen is displayed.
1
■In the case of wrong judgment
(judgment of non-defective
product)
■Judgment by component
●Components are placed during foreign
body inspection.
●If there is any other defective
component, the next one is displayed.
■In the case of defective
component judgment
●Components are not placed during
foreign body inspection.
●If there is any other defective
component, the next one is displayed.
Component
inspection
The displayed screen is switched.
Nominator / Denominator
For “Foreign material detection” :Number of images/total images
(→P.4-4-4
-5 ‘Foreign material inspection NG screen’)
For other than “Foreign material detection” :Number of bad items/total bad items
The display information differs depending on “Bad item”.
NPM-W2 EJM7DE-MB-04O-00
4-4-4-3
1
1
2
+
+
2
Wrong judgment input
screen 2
Operating procedure
4-4-4
Produc-
tion
(Sets all the undefined as NG)
(Components are not placed on an entire
PCB regardless of the presence /
absence of NG judgment during foreign
body inspection)
(Prevents components from being placed
in the positions judged as NG during
foreign body inspection)
■Collective judgment (The number of NG judgments < 100)
When setting all the undefined at once