N7201A616E00_0317.pdf - 第436页
NPM-W 2 EJM7DE-MB-06O-0 0 Produc- tion data teaching 6-2-2 -1 PCB recognition Production data is cor rected by r ecognizing mark s set on the print patterns of a board and calculat ing the difference in print pattern pos…
NPM-W2 EJM7DE-MB-06O-00
A
B
D
■To move a camera upward
■To move a camera downward
■To move a camera left direction
■To move a camera to right direction
Inching key
6-2-1-4
How to adjust the lamp value
Describes how to adjust the lighting (lamp) when an image obtained by teaching is not clear.
C
Lamp value adjustment button
■Increase the lamp value
(Brighter)
■Decreases the lamp value
(Darker)
Changes the lamp value changing rate.
Changes the moving rate.
* The lamps are arranged from the inner
side ordering lamp 1 (inner side) to
lamp 4 (outer side).
A
B
C
D
Setting
change
NPM-W2 EJM7DE-MB-06O-00
Produc-
tion data
teaching
6-2-2-1
PCB recognition
Production data is corrected by recognizing marks set on the print patterns of a board and calculating the
difference in print pattern position between the board and production data.
Set recognition marks for placement before a placement operation.
●There are three types of recognition modes; [PCB], [Group] and [Pattern]. You can set both recognition
and bad marks by type (a bad mark is used to judge NG placement).
Pattern 1 Pattern 2
Pattern 3 Pattern 4
Pattern 5
Pattern 6
Pattern 9
Pattern 10
Pattern 11
Pattern 12
Pattern 13 Pattern 14
Pattern 15 Pattern 16
Group recognition
mark
Group
bad mark
Group recognition marks
PCB recognition
mark
PCB
bad mark
Pattern 7
Pattern 8
Pattern
bad mark
Pattern recognition marks
PCB recognition teach
1
Group 1
Group
recognition
marks
PCB
Group 2
Operating procedure
6-2-2
PCB recognition
mark
NPM-W2 EJM7DE-MB-06O-00
6-2-2-2
Setting
change
Teaching Flow
Inputting the PCB data
Inputting the PCB recognition data
Starting the teaching
Setting the lamp values
Recognition
Created on NPM-DGS
← Unnecessary if the automatic
lamp setting is selected
Saving data
Recognition Test
Teaching is complete