N7201A616E00_0317.pdf - 第550页

NPM-W 2 EJM7DE-MB-07 O-00 7-1-1 -11 No. Item name Function when [ON] is sel ected 11 Tray pickup orde r Y direc tion change (front) Picks up tray parts (front side) in or der in the longitudin al direction (Y direc tion)…

100%1 / 714
NPM-W2 EJM7DE-MB-07O-00
No. Item name Function when [ON] is selected
1
Tray Pts-collation
(option)
If trays containing any parts different from those in the production data
downloaded to the machine are loaded, the interlock function of the machine
is activated, disabling production from being continued automatically.
2 Tray auto sort
Rearranges the pallets judged to have been loaded in wrong positions
(detected by parts collation via RIFD) to their correct positions according to
the production data.
3
Send require sorted in
tray
Uses the loaded stock trays in order from top to bottom.
4
Part remainder
number warning
Displays a warning message when “Feeder remainder number warning
length” in “Action parameters” is reached.
5
Tray stock Auto.
change
When the top pallet position of the stock tray is emptied, a lower pallet
containing the same parts will be moved to the position during parts supply.
6 Use tray supply side
Allows tray parts to be replenished and NG pallet parts to be removed from
the tray supply side during production.
7
Tray outside parts
collation
(option)
Enables tray feeder collation by the customer’s parts collation system.
When replenishing parts after a parts empty error, this option inquires of the
parts collation system whether collation has done. If collated, parts
replenishment will be completed to continue production. If not collated, parts
replenishment is considered to be unfinished and production will be stopped.
8
Make tray counter
changeable
Enables the tray counter to be only after production changeover until the
start of the first production.
9
All arranged
components supply
target
Allows loading of trays that contain any parts registered in the arrangement
list.
10
During the production
the tray magazine
shutter is off
Keeps the magazine shutter closed during production.
7-1-1-10
Setting information 9
● Default ：OFF
■ Tray
System
administration
NPM-W2 EJM7DE-MB-07O-00
7-1-1-11
No. Item name Function when [ON] is selected
11
Tray pickup order Y
direction change
(front)
Picks up tray parts (front side) in order in the longitudinal direction (Y
direction).
12
Tray pickup order Y
direction change
(rear)
Picks up tray parts (rear side) in order in the longitudinal direction (Y
direction).
13
Prod unused parts
supply action
Prevents the pallets not used for production from moving to the tray supply
side even when parts are exhausted.
14
Return the parts
when teaching
Returns the tray parts used for teaching to their original positions after
teaching.
This enables recognition test for all the parts on the pallet after teaching.
15
RFID tray remain
correspond
Holds the parts remainder in the memory of pallets when RFID-supported
tray feeder is used.
16
No tray remain RFID
load confirm
No confirmation dialog for loading parts remainder is displayed when RFID-
supported tray feeder is used.
17
Do vacuum miss
check before tray
action
Sets the tray change timing after checks component pickup by the vacuum
sensor before changing trays during production.
Setting information 10
● Default ：OFF
■ Tray
Unit
setting
Option setting 6
Operating procedure
7-1-1
NPM-W2 EJM7DE-MB-07O-00
7-1-1-12
No. Item name Function when [ON] is selected
1
One Side Mark
Recog
When a part of recognition mark on PCB is hidden behind the conveyor rail,
this option enables recognition with visible area of the mark.
2
Detect mark
appropriate
determine
Prevents false detection of marks in the following cases:
(1) Uneven luster in area other than mark
(2) Land patterns open on one side
(3) Similar shape patterns other than mark
(4) Thru-holes of similar size other than mark
No. Item name Function when [ON] is selected
1
Save recognize
screen in time
Saves all images of the parts for which “Force to save the recognition OK
image” has been set in the production data, regardless the result of
recognition.
2
Micro parts takeout
detection
Recognizes the end of nozzle by the recognition camera and makes checks
by the vacuum sensor after mounting a part. If “part takeout” has occurred,
“mount error” is displayed.
No. Item name Function when [ON] is selected
1
Measure by the
height sensor (front)
Measures the board height (warp) by the height sensor, in order to control the
nozzle height during mounting or dispensing.
2
Measure by the
height sensor (rear)
Measures the board height (warp) by the height sensor, in order to control the
nozzle height during mounting or dispensing.
Setting information 11
● Default ：OFF
■ Head camera
● Default ：OFF
■ Multi-recognition camera
● Default ：OFF
■ Height sensor
System
administration