N7201A616E00_0317.pdf - 第540页

NPM-W 2 EJM7DE-MB-07 O-00 Unit setting Option setting 1 7-1-1 -1 Operating procedure 7-1-1 1 2 A A 1 2 For temporary suspended option setting Choose the settings of each item The previous or next table is displayed. B A …

100%1 / 714
7 System Administration
NPM-W2 EJM7DE-MB-07O-00
Unit
setting
Option setting 1
7-1-1-1
Operating procedure
7-1-1
1 2A
A
1
2
For temporary suspended
option setting
Choose the settings of each
item
The previous or next table is
displayed.
B
A
Option item set status
(The description of the selected item
is displayed)
■To enable the item
■To disable the item
Entire condition of system actions is configured.
You can set either ON or OFF on each item.
B
1) Some options are not available depending on the model. In such cases,
the multi recognition camera is to be used instead.
1)
NPM-W2 EJM7DE-MB-07O-00
7-1-1-2
System
administration
No. Item name Function when [ON] is selected
1 Quality trace
Transfers the log files including pickup/mounting orders and correction
values to the LNB during automatic operation.
2
Comm. abnormality
MC stop
Stops the NPM machine if communication with the LNB is broken.
3
Operation mode
Switch SD
Displays a message requesting the key disk (SD) when an attempt is made
to switch the operation mode to Engineer. Insert the key disk to switch to the
Engineer mode.
4 Parts trace
Sends the parts trace information to the LNB once the operation is started.
The information to be sent include the part information that is written to the
tape feeders whenever production of a PC board has been finished, and the
mounted part information by mounting point.
5
Screen print SD
output
Pressing the print screen switch saves the screenshot onto an SD card.
6
Empty Parts Auto
Screen Transition
If a “parts empty” error has occurred, the display automatically switches to
the reminder monitor screen of the part component concerned.
7
Empty Parts Auto
Screen Transition
(with stock)
If a “parts empty” error has occurred, the display automatically switches to
the reminder monitor screen of the part component concerned.
8
Auto product change
(option)
Performs production changeover (loading production data, replacing nozzles
and support pins, and adjusting the conveyor rail width, etc.) automatically.
9
Auto product change
PCB bar code recog
(option)
Recognizes barcodes on PCBs by the head camera to perform production
changeover automatically.
10
In again when auto
product change
Permits the production data to be downloaded when switching the production
data in cases where the ‘Auto product change’ function is used and defective
PC boards are reloaded after repair.
11
NG part Eject before
mounting
Ejects parts judged to be NG such as pickup error, recognition error or raised
lead, before mounting.
12
Inspection MC feed
back (option)
Displays the feedback information (warning or error information) from the
inspection machine after mounting.
Setting information 1
●Default：OFF
■Whole