N7201A616E00_0317.pdf - 第482页
NPM-W 2 EJM7DE-MB-06O-0 0 6-2-9 -5 Produc- tion data teaching Placement coor dinates teac h 3 Operating procedure 6-2-9 3 + 4 4 T eaching with component (measuring method: 1 point) 2 A B A B Once an action starts, the bu…
NPM-W2 EJM7DE-MB-06O-00
6-2-9-4
Setting
change
Teaching with component (measuring method: 1 point) 1
1
2
Set a PCB on the PCB entrance
1
3
Choose a teaching mode
●
The description below
assumes to be chosen
●Perform on both and .
NPM-W2 EJM7DE-MB-06O-00
6-2-9-5
Produc-
tion data
teaching
Placement coordinates
teach 3
Operating procedure
6-2-9
3
+
4
4
Teaching with component (measuring method: 1 point) 2
A
B
A B
Once an action starts, the button changes to “Stop”.
The head moves to the next coordinates and after it
stops and the time set on Teach image confirm
*1)
has
elapsed, it automatically moves to the next coordinates.
The action is repeated until the last coordinates
Press the [Stop] button on the coordinate you want
perform teach.
*1) (→ 7-1-2
-2 “Teach image confirm”)
If you press this button, the head stops on the
coordinate and you can perform teach.
Once an action starts, the button changes to
“Moving”.
Pressing the [Moving] button starts moving from
next coordinates.
●Movement also stops by pressing the [STOP]
key. However, if independent placement is
performed, the machine stops as single stop.
NPM-W2 EJM7DE-MB-06O-00
6-2-9-6
Setting
change
5
Choose SEQ number of a
component to evaluate
6
6
+
5
7
7
8
9
8 9
+
●The component shape is displayed
when both the length and width of
the component maximum outer size
are below 2.0 mm and the
placement angle is 45 degree basis.