N7201A616E00_0317.pdf - 第585页
NPM-W 2 EJM7DE-MB-07 O-00 7-2-4 -2 System administration
NPM-W2 EJM7DE-MB-07O-00
Unit
adjust-
ment
Output check
7-2-4-1
2
You can check the status, to which the name of each Bit is given, of all the output addresses used by the
machine and switch between ON/OFF as needed.
1
B
A
C
D
E
■[Output confirm] screen
F
3
Operating procedure
7-2-4
Choose a channel
Address
Scroll the table right and left.
Bit
Index number.
Name
Status
I/O status (ON/OFF status).
Transition to the tray screen
●Displayed when the tray feeder is
installed.
●When Bit is , it is displayed in
blue.
Hold down and press
[Name]
To change status
■To enable
■When you change status of each Bit
■To disable
to
DA
1
C
EB 2 F
NPM-W2 EJM7DE-MB-07O-00
7-2-4-2
System
administration
NPM-W2 EJM7DE-MB-07O-00
Replacing the nozzle of
the placement head 1
7-2-5-1
Removing nozzles
Remove nozzles on the placement head and stored into the nozzle changer.
This explains how to house some of the nozzles attached to the placement head in the nozzle changer, or
to attach some of the nozzles housed in the nozzle changer to the placement head.
●Perform on both and .
Unit
adjust-
ment
Operating procedure
7-2-5
Choose a nozzle to remove
1
2
(The button turns in blue color)
3
Choose with
Choose with
Choose the position to
store the nozzle
4
(The button turns in blue color)
+
5
5B C
4
B C A
1 2
3