00198178-04_GS_FeederManager_3.3_R18-1_EN.pdf - 第123页
SIPLACE Feeder Ma nager 3.3 (R18 -1) / Getting S tarted 08/2018 Edition 123 W hen a blocked feeder is exchanged with an available feeder, F M Line Console r eflects the changes and updates t he location f or both feeders…
SIPLACE Feeder Manager 3.3 (R18-1) / Getting Started 08/2018 Edition
122
Figure 13-11 Line Selection
A list of lines retrieved from SIPLACE Pro will be displayed.
Select the line(s) to be monitored and click on the OK button.
The selected line will be added and connected.
Note:
Unlike previous version, the added line will be connected automatically.
Note:
At any time, the user can right click on the line or any station under it and click Delete to
delete the line from the monitoring list.
Figure 13-12 Delete Line
13.2.2 Placed and removed feeders
FM Line Console will monitor feeders that are placed and removed on the connected line(s).
When a feeder is placed, the feeder will be updated to FM Line Console and the feeder
location will be associated to the station location.
The feeder information will be displayed by the station. The user can select a station location
to view all the feeders on that location.
SIPLACE Feeder Manager 3.3 (R18-1) / Getting Started 08/2018 Edition
123
When a blocked feeder is exchanged with an available feeder, FM Line Console reflects the
changes and updates the location for both feeders.
When a feeder is removed, the feeder location will be associated to the line location and the
feeder status will be changed from In Use to Available.
Example of the information displayed on FM Line Console for the station:
Figure 13-13: Station and status
Once the line is successfully added, the stations under this line will be visible from inside the
Line Console UI. The user can then select the station location and feeders consecutively.
The selected station location will be highlighted by dark blue frame and triangles as seen
above. The Feeder Details of the selected feeder will be shown on the right hand side panel.
When mouse-over on the feeder graphics, a tooltip will be shown to indicate the feeder details
also.
Figure 13-14 Feeder Graphics Tooltip
SIPLACE Feeder Manager 3.3 (R18-1) / Getting Started 08/2018 Edition
124
FM Line Console will display a feeder summary of the feeders for which the maintenance
status is Due/Overdue/Defective/Scrapped on the selected line(s) and will send an alert
message “Feeders need attention” to the station computer via the SIPLACE OIB Display
Service on a fixed frequency, which is configured in the Global Settings view in FM Client,
see section 9.1.5 for details.
13.3 Feeder location tracking with wired barcode scanner (DYN 550)
If a DYN 550 wired barcode scanner is connected to the PC, it can be used to create new
feeders by using vendor labels and to assign feeders to a location in all areas.
In the Feeder Manager Installation Manual, item no. 00198179-02 more information can be
found on installing and configuring the DYN 550 wired barcode scanner.