00198178-04_GS_FeederManager_3.3_R18-1_EN.pdf - 第139页
SIPLACE Feeder Ma nager 3.3 (R18 -1) / Getting S tarted 08/2018 Edition 139 For assignm ent of feeders to station locat ion and table, a track ass i gnment is compulsor y. For assignment of feeders to table, if the tab l…
SIPLACE Feeder Manager 3.3 (R18-1) / Getting Started 08/2018 Edition
138
Figure 14-26: Mark Feeder as Defective – Result
Tap on Close to exit the screen.
14.3.5 Assign Feeder to Location
With this function the user can assign a feeder to a location. There are 3 possible workflows:
(1) Assign to Production Line Station Location
Scan station location barcode
Scan track
Scan feeder barcode
Repeatable for next track and feeder
(2) Assign to Changeover Table in the Offline Area
Scan COT table barcode
Scan offline area (only if the table is not in offline area)
Scan track
Scan feeder barcode
Repeatable for next track and feeder
(3) Assign to Storage Area, Maintenance Area, Outside Factory or General Location
Scan location barcode
Scan feeder barcode
Repeatable for the feeder
Select Assign Feeder to Location in the Main menu.
Note:
Starting from Feeder Manager V2.3, the user is not allowed to manually assign X feeders
to either online locations or COTs in the offline areas.
SIPLACE Feeder Manager 3.3 (R18-1) / Getting Started 08/2018 Edition
139
For assignment of feeders to station location and table, a track assignment is compulsory.
For assignment of feeders to table, if the table does not belong to offline area, the user will be
prompted to scan an offline area for offline assignment.
The following screen is displayed for workflow (3), in which the user is prompted to scan a
location barcode.
Figure 14-27: Assign Feeder to Location
Location Details tab
Scan the location barcode of the feeder.
The following screen is displayed, in which the user is prompted to scan a feeder barcode.
The feeders already assigned to the location are listed.
Figure 14-28: Assign Feeder to Location – Scan Feeder
Feeders tab
Scan the feeder barcode of the feeder that shall be assigned to the location.
The following screen is displayed, in which the scanned feeder barcode is entered.
SIPLACE Feeder Manager 3.3 (R18-1) / Getting Started 08/2018 Edition
140
Figure 14-29: Assign Feeder to Location – Feeder ID
Tap on Save to save the entries.
Tap on Menu – Close to exit the screen.
or
Tap on Menu – Clear Form to perform the function for another feeder.
14.3.6 Place Table
With this function the user can place a changeover table into a station location.
Note:
Feeder Manager does not support changeover table (COT) placement in a docking
station.
Select Place Table in the Main menu.
The following screen is displayed, in which the user is prompted to scan a table barcode.
Figure 14-30: Place Table – General
General tab
Scan the table barcode of the table that shall be placed.