00198178-04_GS_FeederManager_3.3_R18-1_EN.pdf - 第31页
SIPLACE Feeder Ma nager 3.3 (R18 -1) / Getting S tarted 08/2018 Edition 31 Next Due Cycle The num ber of cycle counts to the next due value is dis played for the def ective/serviced feeder. Next Overdue Cycle The num ber…
SIPLACE Feeder Manager 3.3 (R18-1) / Getting Started 08/2018 Edition
30
Clicking the Export To Excel button will allow you to export the current feeder’s location
assignment history to an excel file.
Note:
Exported excel files require Microsoft Office Excel or Excel Viewer 2007 or higher to open.
5.1.5 Feeder Service History tab
This tab allows you to display the feeder’s service history within a certain timespan at your
selection. The result will be displayed in the table below.
Note: If you don’t select From and To time before clicking the Display button, all the available
service history for this feeder will be displayed.
Figure 5-8: Feeder Maintenance History tab
The fields of the service history data records are explained below.
5.1.5.1 Description of Fields of the Feeder Service History
Timestamp
This is the timestamp of a particular record in the list for tracking purposes.
Category
This is the category of the maintenance activity, including (Defect, Verification and Complete
Maintenance).
Current Cycle
The current cycle count is displayed for this feeder.
SIPLACE Feeder Manager 3.3 (R18-1) / Getting Started 08/2018 Edition
31
Next Due Cycle
The number of cycle counts to the next due value is displayed for the defective/serviced
feeder.
Next Overdue Cycle
The number of cycle counts to the next overdue value is displayed for the defective/serviced
feeder.
Maintenance Due Date
The maintenance due date is displayed for the defective/serviced feeder.
Maintenance Overdue Date
The maintenance overdue date is displayed for the defective/serviced feeder.
Result
This is the result of the feeder verification test. This field is only applicable for maintenance
category Verification.
When the record is selected, a detail pane for the record is shown below the Maintenance
History table. Based on the maintenance category, the detail pane will show following fields.
Figure 5-9 Feeder Maintenance History - Defect Detail
Defect Comment
This is the comment entered when the feeder defect is reported.
Defect Comment Entry Date
This is the Date/Time when the defect comment is entered.
Figure 5-10 Feeder Maintenance History - Verification Detail
SIPLACE Feeder Manager 3.3 (R18-1) / Getting Started 08/2018 Edition
32
Division
This is the target division of the feeder verification/test. For single-division feeders, this value
is always 1.
Test Result
This is the result of the feeder verification/test.
Hardware Cycle Count
This is the feeder cycle count that feeder verification and repair station reads from the feeder.
Figure 5-11 Feeder Maintenance History - Complete Maintenance Detail
Defect Category
This is the defect category that was selected on completing maintenance for the
defective/serviced feeder.
The following defect categories are provided for selection:
– Electrical error
– Foil disposal unit
– Foil rocker
– Mechanical error
– Normal maintenance
– Pick up window
– Tape drive unit
Serviced By
This is the name of the person that serviced the feeder.
Part Number
This is the part number of an exchanged spare part.
Feeder Service Comment
This is the feeder service comment that was entered when maintenance was marked as
complete for the defective/serviced feeder.
Service Comment Entry Date
This is the date and time when the service comment was entered for the defective/serviced
feeder.