00198178-04_GS_FeederManager_3.3_R18-1_EN.pdf - 第3页
SIPLACE Feeder Ma nager 3.3 (R18 -1) / Getting S tarted 08/2018 Edition 3 Contents 1 Introduction 7 1.1 Document purpose ............................................................................................ 7 1.2 …
All names identified by ® are registered trademarks of the ASM Assembly Systems GmbH & Co. KG. The
remaining trademarks in this publication may be trademarks whose use by third parties for their own purposes
could violate the rights of the owner.
We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the
information given in this publication is reviewed regularly and any necessary corrections are included in
subsequent editions.
Copyright © ASM Assembly Systems Technical data subject to change
ASM Assembly Systems GmbH & Co. KG Item-no.: 00198178-04
Rupert-Mayer-Strasse 44
81379 München
Germany
www.asm-smt.com
SIPLACE Feeder Manager 3.3 (R18-1) / Getting Started 08/2018 Edition
3
Contents
1 Introduction 7
1.1 Document purpose ............................................................................................ 7
1.2 Document structure ........................................................................................... 8
1.3 Symbols ............................................................................................................ 8
2 Information 9
2.1 Where can I get information............................................................................... 9
2.2 SIPLACE on the World Wide Web (WWW) ....................................................... 9
2.3 Languages ........................................................................................................ 9
2.4 Online Help ..................................................................................................... 10
2.4.1 Accessing the Online Help via the F1 key........................................................ 10
2.4.2 Accessing the Online Help via the Menu bar ................................................... 10
3 Starting / Terminating Feeder Manager 11
3.1 Starting the Feeder Manager Client ................................................................. 12
3.2 Terminating the Feeder Manager Client .......................................................... 12
3.3 Starting the Feeder Manager Line Console ..................................................... 13
3.4 Terminating the Feeder Manager Line Console ............................................... 13
4 Program Overview 14
4.1 Input elements and controls............................................................................. 14
4.2 User classification ........................................................................................... 14
4.3 Graphical User Interface – Main menu ............................................................ 15
4.3.1 Feeder menu group ......................................................................................... 16
4.3.2 Location menu group ....................................................................................... 16
4.3.3 Feeder Type menu group ................................................................................ 16
4.3.4 Alert menu group ............................................................................................. 17
4.3.5 Reports menu group ........................................................................................ 17
4.3.6 Settings menu ................................................................................................. 17
4.3.7 Location Tree .................................................................................................. 18
4.3.8 Icons in Feeder Manager Client ....................................................................... 19
4.3.9 Application-orientated operation by using color marks ..................................... 20
5 Feeder centric functions 21
5.1 Add New Feeder & Feeder Details view .......................................................... 21
5.1.1 Add New Feeder view and Feeder Console tab............................................... 21
5.1.2 Modifying feeder details ................................................................................... 25
5.1.3 Feeder Maintenance Status tab ....................................................................... 25
5.1.3.1 Date Based Maintenance: ............................................................................... 26
5.1.3.2 Cycle Based Maintenance ............................................................................... 27
5.1.3.3 Feeder Cycle Count Detail .............................................................................. 28
5.1.4 Feeder Location Assignment History tab ......................................................... 28
5.1.5 Feeder Service History tab .............................................................................. 30
5.1.5.1 Description of Fields of the Feeder Service History ......................................... 30
5.2 Add New Feeders (Batch) view ....................................................................... 33
5.2.1 Description of the fields ................................................................................... 34
5.2.2 Print Feeder ID Barcodes ................................................................................ 35
5.3 Search Feeder view ........................................................................................ 36
5.3.1 Search feeder by details .................................................................................. 36
5.3.2 Search feeder by warranty information ............................................................ 38
5.3.3 Search Result page ......................................................................................... 39
SIPLACE Feeder Manager 3.3 (R18-1) / Getting Started 08/2018 Edition
4
5.4 Feeder Maintenance Workflow ........................................................................ 41
5.4.1 Step 1 - Enter feeder information ..................................................................... 42
5.4.2 Step 2 - Run SFTS or XFTS to check feeder ................................................... 42
5.4.3 Step 3 – Maintenance Information ................................................................... 43
5.4.4 Step 4 – Feeder Repair Option ........................................................................ 43
5.4.5 Step 5 – Option to check feeder with SFTS or XFTS again ............................. 44
5.4.6 Step 6 – Summary ........................................................................................... 45
5.5 Feeder Repair Workflow .................................................................................. 45
5.5.1 Step 1 - Enter feeder information ..................................................................... 46
5.5.2 Step 2 - Run SFTS or XFTS to check feeder ................................................... 47
5.5.3 Step 3 – Repair Information ............................................................................. 47
5.5.4 Step 4 – Feeder Maintenance Option .............................................................. 48
5.5.5 Step 5 – Option to check feeder with SFTS or XFTS again ............................. 48
5.5.6 Step 6 – Summary ........................................................................................... 49
6 Location centric functions 50
6.1 Add New Location view ................................................................................... 50
6.1.1 Description of the fields ................................................................................... 50
6.1.2 Description of the buttons ................................................................................ 52
6.2 Search Location view ...................................................................................... 53
6.2.1 Description of the fields ................................................................................... 53
6.2.2 Description of the buttons ................................................................................ 54
6.3 Print Offline Area Setup ................................................................................... 55
6.3.1 Description of the fields ................................................................................... 55
6.3.2 Description of the buttons ................................................................................ 55
6.4 Import Locations view ...................................................................................... 56
7 Feeder Type centric functions 58
7.1 Add New Feeder Type view............................................................................. 58
7.1.1 Description of the fields ................................................................................... 58
7.1.2 Description of the buttons ................................................................................ 59
7.2 Search Feeder Type view ................................................................................ 60
7.2.1 Description of the fields ................................................................................... 60
7.2.2 Description of the buttons ................................................................................ 61
7.2.3 Editing the maintenance plan .......................................................................... 61
7.2.3.1 Feeder Type Details ........................................................................................ 62
7.2.3.2 Date Based Maintenance Plan ........................................................................ 62
7.2.3.3 Cycle Based Maintenance Plan ....................................................................... 62
7.2.3.4 Buttons ............................................................................................................ 63
7.3 New Feeder Type Import view ......................................................................... 64
7.3.1 Description of the fields ................................................................................... 65
7.3.2 Description of the buttons ................................................................................ 66
7.3.3 Support of new feeder types as of Feeder Manager 3.3 .................................. 66
8 Report centric functions 67
8.1 Feeder Summary Report view ......................................................................... 67
8.1.1 Description of the fields ................................................................................... 67
8.1.2 Description of the buttons ................................................................................ 68
8.2 Feeder Exchange Summary Report view ........................................................ 70
8.2.1 Description of the fields ................................................................................... 70
8.2.2 Description of the buttons ................................................................................ 71
8.3 Feeder Summary by Location Report view ...................................................... 71
8.3.1 Description of the fields ................................................................................... 71
8.3.2 Description of the buttons ................................................................................ 72
8.4 Available Feeders Over Time Monthly Report view ......................................... 74
8.4.1 Description of the fields ................................................................................... 74
8.4.2 Description of the buttons ................................................................................ 74
8.5 Feeder Maintenance Defect Report view ......................................................... 75
8.5.1 Description of the fields ................................................................................... 76
8.5.2 Description of the buttons ................................................................................ 76