00198178-04_GS_FeederManager_3.3_R18-1_EN.pdf - 第128页
SIPLACE Feeder Ma nager 3.3 (R18 -1) / Getting S tarted 08/2018 Edition 128 About Tap on this m enu item to get inf ormation on the Fe eder Manager versio n and copyright. Exit Tap on this m enu item to term inate th…
SIPLACE Feeder Manager 3.3 (R18-1) / Getting Started 08/2018 Edition
127
Figure 14-3: Function area for X feeders only
Figure 14-4: Function area for X and S feeders
In this area the user selects the function to be performed. The following functions are
available:
Check Feeder Status
X Feeder ID Association
Change Feeder Type
Mark Feeder as Defective
Assign Feeder to Location
Place Table
Remove Table
The single functions are described in section 14.3.
14.2.3 Menu bar
The menu bar contains the File and Options menus and a key board function to tip text.
Tap on the respective menu to open it.
14.2.3.1 File menu
Figure 14-5: Main menu – File menu
SIPLACE Feeder Manager 3.3 (R18-1) / Getting Started 08/2018 Edition
128
About
Tap on this menu item to get information on the Feeder Manager version and copyright.
Exit
Tap on this menu item to terminate the application.
14.2.3.2 Options menu
Figure 14-6: Main menu – Options menu
Test Barcode
Tap on this menu item to test a barcode.
The following screen is displayed.
Figure 14-7: Test Barcode
Scan the barcode that shall be tested.
Tap on Close to exit the screen.
SIPLACE Feeder Manager 3.3 (R18-1) / Getting Started 08/2018 Edition
129
Configure
Tap on this menu item to display or modify the configuration.
Figure 14-8: Configure – Server Connection
Server Connection tab
The IP address for the Feeder Server is displayed in the Feeder Server IP address field. This
entry can be modified.
Enter the details that shall be changed of the IP address.
It shall have the correct IP address of the machine, where the Feeder Server has been
installed.
Tap on the Update button to save the changed IP address.
Tap on the Close button to exit the screen.
Figure 14-9: Configure – Global Settings
Global Settings tab
The barcode description in the Global Settings is displayed.