00198178-04_GS_FeederManager_3.3_R18-1_EN.pdf - 第78页

SIPLACE Feeder Ma nager 3.3 (R18 -1) / Getting S tarted 08/2018 Edition 78 9.1 Common Co nfiguration W hen the Setting dialog is opened, the first tab Co mmon Conf iguration is s elected by default. Figure 9-3 Setting s …

SIPLACE Feeder Manager 3.3 (R18-1) / Getting Started 08/2018 Edition

9 Settings menu

 Click on Settings button in the menu bar to open the Setting dialog.

Figure 9-1 Settings menu button

From the Settings function, the user can

1) Define a common configuration,

2) Make global settings,

3) Define feeder and location ID format,

4) Define barcode label printing format for feeders and locations,

5) Change user passwords

Note:

The language change function which was previously parked under Settings, is now

accessed from the ASM Studio main menu.

Figure 9-2 ASM Studio Language Change

SIPLACE Feeder Manager 3.3 (R18-1) / Getting Started 08/2018 Edition

9.1 Common Configuration

When the Setting dialog is opened, the first tab Common Configuration is selected by

default.

Figure 9-3 Settings - Common Configuration

Inside the Common Configuration, following connections can be configured.

1) FM Server connection

2) OIB Core connection

3) X-Feeder Test connection (X-FVS)

4) XFTS connection

5) SFTS connection

9.1.1 FM Server and OIB Server Connection

Feeder Manager Server and OIB Core Server connection can be configured by the following

fields.

Figure 9-4 FM Server and OIB Server configuration

SIPLACE Feeder Manager 3.3 (R18-1) / Getting Started 08/2018 Edition

Server:

Host name or IP address for the two servers will be filled based on the ones provided by the

user during installation.

The user can modify these entries as needed.

Connection status

The connection status (Connected or Disconnected) is displayed for the servers of the

configuration.

Test Connection button can be used to verify the correctness of the entered server host

name or IP address. Once pressed, the connectivity will be checked, and a pop up dialog will

inform the user whether the test is successful or not.

Note: After test connection, the user need to explicitly save it, otherwise the change will not

take effect.

9.1.2 X-Feeder Test connection (X-FVS)

For the Feeder Manager integration the following options are provided in the Common

Configuration tab.

Figure 9-5 Settings view – X Feeder Test

None

The option is enabled by default after a new installation.

Enable X-Feeder Test Station (X-FVS)

Enable the option for X-FVS integration. After pressing the Save button, the Feeder Manager

will start to monitor the directory specified in the Transfer Directory. The Feeder Manager

Client checks if the option Export test result to feeder manager under Extras – Feeder

Manager Adjustment is enabled. If not the following warning is displayed:

Figure 9-6 Warning message

Note:

After changing settings in X-FVS software, the software must be closed for the

changes to make effective. Otherwise, the changes are not received by the

Feeder Manager.