00198178-04_GS_FeederManager_3.3_R18-1_EN.pdf - 第63页
SIPLACE Feeder Ma nager 3.3 (R18 -1) / Getting S tarted 08/2018 Edition 63 Block feeder w hen cycle ov erdue Allows the user to d efine, that a feeder sha ll be mark ed as blocked, when the overdue value is exceeded. If …
SIPLACE Feeder Manager 3.3 (R18-1) / Getting Started 08/2018 Edition
62
7.2.3.1 Feeder Type Details
This section contains information about the feeder type and can be modified. The fields and
buttons are described in the sections above.
7.2.3.2 Date Based Maintenance Plan
This section contains information about the date-based maintenance plan for a particular
feeder type and can be modified.
Enable date based maintenance
Allows the user to enable date-based maintenance.
Block feeder when date overdue
Allows the user to define, that a feeder shall be marked as blocked, when the overdue date is
exceeded. If this field is unchecked, the status of the feeder remains Available even after the
feeder is overdue for maintenance and the feeder can still be used.
Note: If this option is checked, Feeder Manager will set the feeder to the “Blocked” status
when it’s maintenance status becomes overdue. This “Blocked” status is only visible from
inside Feeder Manager Client and Line Console.
For Enforced Feeder Block feature, please refer to the Settings Enforce Feeder
Block.
Maintenance due days
Allows the user to define/modify the number of days before a feeder of this particular feeder
type is due for servicing.
Maintenance overdue days
Allows the user to define/modify the number of days before a feeder of this particular feeder
type is overdue for servicing. The recommended range for the date-based maintenance plan
is displayed.
Number of day(s) to alert user prior maintenance due
Allows the user to define/modify a number of days that remains before a feeder of this
particular feeder type is due for servicing. When the defined number of days is reached, the
user will be alerted by the system.
7.2.3.3 Cycle Based Maintenance Plan
This section contains information about the cycle-based maintenance plan for a particular
feeder type and can be modified.
Enable cycle based maintenance
Allows the user to enable cycle-based maintenance.
SIPLACE Feeder Manager 3.3 (R18-1) / Getting Started 08/2018 Edition
63
Block feeder when cycle overdue
Allows the user to define, that a feeder shall be marked as blocked, when the overdue value is
exceeded. If this field is unchecked, the status of the feeder remains Available even after the
feeder is overdue for maintenance and the feeder can still be used.
Maintenance due cycles
Allows the user to define/modify the number of cycle counts before a feeder of this particular
feeder type is due for servicing.
Maintenance overdue cycles
Allows the user to define/modify the number of cycle counts before a feeder of this particular
feeder type is overdue for servicing. The recommended range for the cycle-based
maintenance plan is displayed.
Percentage to alert user prior maintenance due
Allows the user to define/modify a cycle count percentage that remains before a feeder of this
particular feeder type is due for servicing. When the defined percentage is reached, the user
will be alerted by the system.
7.2.3.4 Buttons
Save
Click on this button to save the changes to the maintenance plan.
Refresh
Click on this button to refresh the display of the maintenance plan.
Delete
Click on this button to delete the feeder type selected.
Note: System Default types cannot be deleted.
Note: Starting from Feeder Manager 3.0, there is no individual maintenance plan per each
feeder. i.e. feeder maintenance plan is updated on feeder type. Individual editing of feeder
maintenance plan is no longer possible.
Any change of feeder maintenance plan won’t take immediate effect. Instead, it only takes
effect when the feeders of the corresponding type are “maintained”, i.e. completed with the
Feeder Maintenance workflow.
It is still possible to continue to use the feeder are it becomes due or overdue for maintenance,
by clicking on the “Extend” button.
SIPLACE Feeder Manager 3.3 (R18-1) / Getting Started 08/2018 Edition
64
7.3 New Feeder Type Import view
Starting from Feeder Manager 3.0, this function is moved to the Settings dialog. Access from
the main menu via Settings New Feeder Type Import.
Click on New Feeder Type Import.
The New Feeder Type Import view is displayed as follows.
Figure 7-4: New Feeder Type Import view
Select the xml file to import the new feeder type and click OK.
A table will display the properties of the new feeder type to be imported.
Figure 7-5: Import Feeder Type – Feeder Type Details Table
Click Save to add the new feeder type.