00198178-04_GS_FeederManager_3.3_R18-1_EN.pdf - 第15页

SIPLACE Feeder Ma nager 3.3 (R18 -1) / Getting S tarted 08/2018 Edition 15 4.3 Graphical Use r Interface – Main menu This section introduc es the user interf ace of Feeder Manager. T he user interf ace is d ivided into t…

SIPLACE Feeder Manager 3.3 (R18-1) / Getting Started 08/2018 Edition

4 Program Overview

4.1 Input elements and controls

 Keyboard

The keyboard acts as the standard input tool to operate the Feeder Manager.

 Trackball and mouse buttons

On the station, the trackball is used to move the mouse pointer across the user interface. The

left mouse button is then used to execute the corresponding function.

Note:

In this guide, the triggering of actions using the left mouse button is always referred to as

"clicking".

 Touch screen on PDA device (MC70, MC75 and MC67 scanner)

The screen on the PDA device acts as the standard input tool for Feeder Manager Mobile

Application. Actions can be directly selected or the corresponding functions triggered by

touching the corresponding object on the screen with the tip of a finger or with a pen.

4.2 User classification

Certain functions or menus can only be carried out/called by specially trained staff. The

following different access levels are available, when Feeder Manager has been installed:

 Admin

This access level has access to all Feeder Manager functions.

 Service

This access level has access to all Feeder Manager functions except the user

management function.

 Operator

This access level has read-only access to Feeder Manager and some basic operational

functions, such as exchanging feeder, marking feeder as defective, assigning feeder to

location and printing barcodes.

SIPLACE Feeder Manager 3.3 (R18-1) / Getting Started 08/2018 Edition

4.3 Graphical User Interface – Main menu

This section introduces the user interface of Feeder Manager. The user interface is divided

into the following areas:

Figure 4-1: Feeder Manager UI elements

The screenshot above shows the main UI of Feeder Manager module when started from

inside ASM Studio. It consists of

 Menu bar: this is the menu area where all the Feeder Manager functions can be

accessed.

 Location Tree: this is an organization tree for the factory locations. The assigned

feeders are displayed in here also.

 View area: this is the area where the views for various Feeder Manager Client

functions will be shown in tab forms.

 Messages: the information, warning and error messages are displayed in here

 Status bar: the FM Server identity and both the connection status to FM Server and

OIB core is displayed here.











(1)

SIPLACE Feeder Manager 3.3 (R18-1) / Getting Started 08/2018 Edition

4.3.1 Feeder menu group

Following functions can be accessed from this menu group

1) Add New Feeder

2) Add New Feeder by Batch (only applicable to S Feeders)

3) Search Feeder

4) Assign Feeder to Location

5) Feeder Maintenance Workflow

6) Feeder Repair Workflow

See chapter 5 Feeder centric functions for more details.

4.3.2 Location menu group

Following functions can be accessed from this menu group

1) Add New Location

2) Search Location

3) Print Offline Area Setup

See chapter 6 Location centric functions for more details.

4.3.3 Feeder Type menu group

Following functions can be accessed from this menu group

1) Add new feeder types and define a maintenance plan

2) Search Feeder Types

See chapter 7 Feeder Type centric functions for more details.