00198178-04_GS_FeederManager_3.3_R18-1_EN.pdf - 第144页
SIPLACE Feeder Ma nager 3.3 (R18 -1) / Getting S tarted 08/2018 Edition 144 15 Example of Use In the following tables s ome typical use cases in the factor y are described. 15.1 A sset management Questions Answers Target…
SIPLACE Feeder Manager 3.3 (R18-1) / Getting Started 08/2018 Edition
143
Once installed successfully, the FM PDA desktop application can be started from the
Windows Start menu or from the desktop icon created by the installer.
Figure 14-34 FM PDA desktop application in Start
menu
Figure 14-35 FM PDA desktop icon
SIPLACE Feeder Manager 3.3 (R18-1) / Getting Started 08/2018 Edition
144
15 Example of Use
In the following tables some typical use cases in the factory are described.
15.1 Asset management
Questions
Answers
Target/Benefit
How many feeders are there
altogether?
How many feeders per type?
Sufficient feeders of each type
available for the new setup?
Organization Tree (only
number of feeders)
Feeder Summary Report
(number of feeders and
type)
Overview of the total
feeder amount
Inventory control
Setup planning
Smooth setup
preparation
Where are the feeders at the
moment (e.g. to count them for
inventory)?
Organization Tree (Location
Areas)
Feeder Summary Grouped
By Feeder Location
Ensure asset availability
How many feeders are
needed?
Are there to many?
Can the number of feeders be
reduced (e.g. buy less feeders
the next time)?
Feeder Summary Report
(search for Feeder Status:
All)
Feeder Status: Available
Feeder surplus
More accurate
investment planning
Minimize feeder assets
How old are the feeders?
Feeder Details, Registration
date
Accurate budget
planning
Which feeders belong to the
production area A, which to
area B?
Where are they at the
moment?
Organization Tree
Feeder Summary Grouped
By Location
Feeder property
Clear property for big
factories with separate
production areas
Figure 15-1: Example of Use - Asset management
SIPLACE Feeder Manager 3.3 (R18-1) / Getting Started 08/2018 Edition
145
15.2 Inspection and maintenance
Questions
Answers
Target/Benefit
Which feeders need to be
maintained?
Alert List
Organize Preventive
Maintenance (PM) of
feeders
Reduce machine downtime
Reduce component
wastage
Where are the feeders that
have to be maintained?
Feeder Summary Report,
(Maintenance Status: All)
Grouped By Location
Organize personnel
resources of feeders
(PM)
Can this feeder be used in the
new setup or is maintenance
due/overdue?
Alert List
Flexible maintenance
planning
Adaptation of PM
schedule to individual
customer workflows
Minimize impact of PM
on productivity
Are there less feeder repairs if
the feeders get maintained
preventively?
Available Feeders Over
Time Monthly Report
Analysis of impact of
PM on feeder lifetime,
feeder defects
Success control
Figure 15-2: Example of Use - Inspection and maintenance
Questions
Answers
Target/Benefit
What is the purpose of X-Feeder
ID Association?
For X-Feeders, no scanning
is required when it is being
in used online (COT in
machine or docking station
that has EDIF connection).
However, when the Feeder
is being used in offline area
(this generally means no
EDIF communication
connection), user can
quickly scan the Feeder
The Feeder ID association is
primary design for old
X-Feeder where the 2D
SIPLACE Barcode on the
side of Feeder does not
contain any Feeder ID
information. It only contains
Part Number and Serial
Number.
Feeder Manager than link the
Feeder ID (read from the