00198178-04_GS_FeederManager_3.3_R18-1_EN.pdf - 第53页
SIPLACE Feeder Ma nager 3.3 (R18 -1) / Getting S tarted 08/2018 Edition 53 Retire Click on this button to ret ire the locat ion. Once retired, the location canno t be used and the Location status chang es to Retired . …
SIPLACE Feeder Manager 3.3 (R18-1) / Getting Started 08/2018 Edition
52
6.1.2 Description of the buttons
Save
Click on this button to save the location details.
Print Barcode
Click on this button to print the barcode label for the location.
For the first time when this function is used, the user will be prompted with the standard
Windows printer selection dialog.
Figure 6-2 Feeder Barcode Printer Selection
User selection will be saved as the default printer for Feeder Manager.
Note:
Feeder Manager default printer is independent of the Windows default printer setting.
See section 9.4 Print Options for details.
For subsequent printing, following message will be shown
Figure 6-3 Feeder Barcode Default Printer Confirmation
Click Yes to directly print to the default printer.
Or
Click No to open the printer selection dialog.
SIPLACE Feeder Manager 3.3 (R18-1) / Getting Started 08/2018 Edition
53
Retire
Click on this button to retire the location. Once retired, the location cannot be used and
the Location status changes to Retired.
Note:
The system does not allow a location to be retired if feeders are assigned to it.
In such cases, the Retire button is disabled.
Activate
Click on this button to activate a retired location.
Upon activation, the location is available for use and the Location status is set back to the
status that was active before retiring.
6.2 Search Location view
Sear Location function can be accessed from the main menu via either
1) Search Search Location or
2) Location Search Location.
The Search Location tab is displayed as following.
Figure 6-4: Search Location view
Enter the details to search for a location.
6.2.1 Description of the fields
Location ID
Allows the user to enter a location ID to search for.
Location area
Allows the user to select a specific location area to search for or all location areas from the
drop-down list. The following pre-defined location areas exist in the system:
– Storage Area
– Offline Area
– Production Area
– Maintenance Area
– Unknown Location
– Outside Factory
SIPLACE Feeder Manager 3.3 (R18-1) / Getting Started 08/2018 Edition
54
Location name
Allows the user to enter a location name to search for.
Location status
Allows the user to select a specific location status or all location states to search for from the
drop-down list. The following pre-defined location status values exist in the system:
Active
A location is active and can be used.
Retired
A location has been retired and cannot be used. A location can only be retired when no
feeders are assigned to it.
Parent location
Allows the user to select a specific parent location or all parent locations from the drop-down
list, if the location has been created as a sub-location of another location.
6.2.2 Description of the buttons
Search
Click on this button to search for a location based on the criteria selected.
A list of locations matching the search criteria is displayed.
Reset
Click on this button to clear all fields and reset them to their default values (if any).
New Location
Click on this button to add a new location.