00196625-03_AI_SX12_PCB_Barcode_de_en.pdf - 第124页

Setting up and Commissioning Installing the PCB Barcode Scanner Installing the 1D PCB Barcode Scanner 124 PCB Barcode LP-Barcode 3.2.2.2 Installing the 1D PCB B arcode Scanner at Cross Angles to the Direction of Travel I…

Setting up and Commissioning

Installing the 1D PCB Barcode Scanner Installing the PCB Barcode Scanner

PCB Barcode LP-Barcode 123

3.2.2 Installing the 1D PCB Barcode Scanner

3.2.2.1 Fixing the 1D PCB Barcode Scanner to the Bracket

The following holding rackets are supplied:

▪ 1D BC holding bracket right and left [03084154-xx]

▪ 2D BC holding bracket left [03083915-xx]

▪ 2D BC holding bracket right [03084153-xx]

The 1D PCB barcode scanner is already preinstalled on its cover angle. For the 1D PCB barcode scan-

ner, use the 1D BC bracket, right and left [03084154-xx].

Unused holding brackets are fixed into the holder to ensure that are not lost (see position 5 in "3.2.1 In-

stallation Position in the Holder" [ ➙ 122]).

Fixing barcode scanner to bracket

Legend

1. 1D BC holding bracket right and left [03084154-xx]

2. Screws DIN 7985-M3 x 3-A2-Z [00368583-xx]

3. Barcode scanner with cover angle

4. Drilled holes for fixture to fixing bracket or holder

► Fix the barcode scanner with its cover angle (3) to the

bracket (1) with the help of the two screws (2).

The installation position on the bracket is the same for all

barcode scanner fitting options.

When installing the barcode scanner parallel to the direc-

tion of travel, the holding bracket must be screwed to the

fixing bracket in the position shown at (4) (see "3.2.2.3.1

Parallel to the Direction of Travel, Left" [ ➙ 125] and

"3.2.2.3.2 Parallel to the Direction of Travel, Right" [ ➙

128]).

When installing the barcode scanner at cross angles to

the direction of travel, the holding bracket is screwed di-

rectly to the holder in the position shown at (4) (see

"3.2.2.2 Installing the 1D PCB Barcode Scanner at Cross

Angles to the Direction of Travel" [ ➙ 124]).

Setting up and Commissioning

Installing the PCB Barcode Scanner Installing the 1D PCB Barcode Scanner

124 PCB Barcode LP-Barcode

3.2.2.2 Installing the 1D PCB Barcode Scanner at Cross Angles to the Direction of Travel

Installing the barcode scanner at cross angles to the direction of travel

Legend

► Insert the holding bracket with the barcode scanner into the holder, so that the bracket can be fixed

to the positions at (4) with the two screws 00323152-DIN 7985-M3 x 6-A4.

1 Holder for BC scanner, mirrored [03078730-

xx]

2 Holder for BC scanner [03083937-xx]

3 Arched aperture with mounting position for fix-

ing bracket and clamping piece, BC scanner

right / left

4 Mounting position for BC scanner, cross an-

gles

5 Park positions for unused BC holding brackets 6 2 screws

(00323152-DIN 7985-M3 x 6-A4-Z)

7 1D BC-holding bracket right and left

[03084154-xx]

8 1D BC scanner with cover angle

Setting up and Commissioning

Installing the 1D PCB Barcode Scanner Installing the PCB Barcode Scanner

PCB Barcode LP-Barcode 125

► Screw the holding bracket tight from below.

The holding bracket creates an angle of approx. 10°.

► To ensure that the fixing bracket and camping piece are at hand when needed for future conversion,

fix both to a suitable position along the arched aperture (3). Position the fixing bracket from above

into the holder and the arched clamping piece from below, against the holder. Now screw both parts

together.

► Fasten unused BC holding brackets to the positions shown at (5).