YSD_Users_E.pdf - 第201页

5-12 5 Creating the board data 3.2 T emperature setting On the Setup screen, press the [T emp. Setting] button to open the “T emperature Setting” dialog box and set the temperature that matc hes the adhesive bond to use.…

100%1 / 401
5-11
5
Creating the board data
3. Creating the setup information
This section describes how to set the nozzle information and make temperature setting.
3.1 Nozzle information
On the Setup screen, press the [Nozzle] button to open the "Nozzle Information" dialog box and set the nozzle
information.
Nozzle information
64557-N7-00
Nozzle Type
Select the nozzle type to use from the drop-down list.
c
CAUTION
If a particular nozzle is set by [Machine] - “Head Offset”, that nozzle takes priority over other nozzles and does not
allow changing the nozzle type. Clear the nozzle set by “Head Offset” to select the nozzle for each board data.
Correct Type
Set this item when using dispense correction. Select the correction type to use from the drop-down list.
5-12
5
Creating the board data
3.2 Temperature setting
On the Setup screen, press the [Temp. Setting] button to open the “Temperature Setting” dialog box and set the
temperature that matches the adhesive bond to use.
Temperature setting
64558-N7-00
Use/Not Use
Place a check in the check box when using temperature setting.
Target Temp.
Enter the temperature you want to set. (Setting range: from ambient temperature to 50°C)
5-13
5
Creating the board data
4. Creating the board information
This section describes how to create board information such as for board size and production methods.
Board
Board data parameters
Data No.
Pattern Name
Skip
X, Y, R
P. No.
Part Name
Head
Bad.
Fid.
Original Block No.
Data No.
Pattern Name
Type
Skip
X, Y, R
Original Block No.
Data No.
Pattern Name
Type
X1, Y1
Mark 1
X2, Y2
Mark 2
Original Block No.
Data No.
Pattern Name
Type
X, Y
Mark
Original Block No.
Board Size XY
Board Size Height
Board Comment
Prod. Board Counter
Prod. Board Count Max.
Prod. Block Counter
Unloader Counter
Unloader Count Max.
Board Fix Device
Pre Fix Timer sec
Trans Height
Conveyor Timer sec
Dot Checking
Refresh Dispense
Conveyor Motor Speed
Conveyor Transfer Way
Data No.
Pattern Name
Skip
Qty.
Head
Sequence
X, Y, R
Mark
Feedback
Data No.
Pattern Name
Skip
Qty.
Head
Sequence
X, Y, R
Fid.
Bad.
Height
Data No.
Comment
Mode
Mark
X, Y
Data No.
Pattern Name
Skip
Qty.
Head
Sequence
X, Y, R
Mark
64304-N7-00