YSD_Users_E.pdf - 第371页

2-1 2 Daily maintenance items Before beginning maintenance In most cases, the main power must be turned off before beginning maintenance work. However , some work is carried out in an emergency stop state while the power…

Chapter 2 Daily maintenance items

Contents

Before beginning maintenance 2-1

1. Cleaning the nozzles 2-2

1.1 Checking the head dispensing 2-2

1.2 Cleaning the nozzles 2-3

2-1

Daily maintenance items

Before beginning maintenance

In most cases, the main power must be turned off before beginning maintenance work.

However, some work is carried out in an emergency stop state while the power is on. In that case, ensure

sufficient safety and press the emergency stop button before beginning the work.

If you need to check the machine operation such as axis movement, leave the power turned on and also

ensure sufficient safety during maintenance.

When operating the machine, the following conditions must be met.

Operating conditions

1. Air pressure is at an appropriate level.

2. Safety covers are closed.

3. Nozzles and other devices are set in place correctly.

2-2

Daily maintenance items

1. Cleaning the nozzles

1.1 Checking the head dispensing

Use the following procedure to dispense adhesive from the head in order to check the nozzle condition.

Press the [Replace Syringe] button.

Press the [Replace Syringe] button on the

Setup screen to display the screen shown on

the right.

Move the head.

Press the [Move default] button to move the

head to the syringe replacement position.

You may also move the head by hand after

pressing the emergency stop button and

opening the cover.

54200-N7-00

Open the cover.

1. When the head is in the syringe

replacement position (front position),

press the emergency stop button and

open the cover.

2. Prepare a rag to use when dispensing

adhesive.

Check the nozzle for adhesive

dispensing.

1. Press the [Replace Syringe] button on the

Setup screen.

Place a rag beneath the head and press

the [Head] button in the "Blow" group box.

3. Check that the adhesive is dispensed

smoothly.

• If the head or syringe was replaced, blow

for a period long enough to bleed the

air.

• When using a Type 111, 112 or 114 nozzle,

dispense adhesive 10 centimeters or