YSD_Users_E.pdf - 第369页
1-5 1 Maintenance 2.3 Required tools Prepare the following tools and items necessary for maintenance. n T ool list : Supplied with machine, : Options Name Description Phillips screwdriver Large, small Slotted (flat-blade)…
1-4
1
Maintenance
2.2 Separately sold options
The following maintenance tools are sold separately as options.
Optional parts
GREASE GUN SET Roll paper for dot station
Bent type nozzle
Standard nozzle
Flexible nozzle
53102-N7-10
n
Optional parts
Product Name Parts List Designation Parts No. Note
Grease gun (with standard nozzle) GREASE GUN K48-M3852-01X
GREASE GUN SET
KHW-M3852-A0X
Nozzle (flexible type) GREASE NOZZLE K48-M3857-00X
Nozzle (bent type) GREASE NOZZLE K48-M3854-00X
Roll paper for dot station
ROLL PAPER KM4-M9330-01X 1 roll
ROLL PAPER 10 KLR-M8C03-00X 10 roll
n
Precautions when handling grease
w
WARNING
INFLAMMATION MAY OCCUR IF GREASE OR LUBRICANT GETS INTO THE EYES. BEFORE HANDLING THE GREASE OR
LUBRICANT, WEAR SAFETY GOGGLES TO ENSURE THE GREASE OR LUBRICANT DOES NOT GET INTO THE EYES.
w
WARNING
INFLAMMATION MAY OCCUR IF GREASE OR LUBRICANT COMES INTO CONTACT WITH SKIN. BE SURE TO WEAR PROTECTIVE
GLOVES TO PREVENT CONTACT WITH SKIN.
w
WARNING
DO NOT TAKE ORALLY OR EAT GREASE OR LUBRICANT. EATING WILL CAUSE DIARRHEA AND VOMITING.
c
CAUTION
After use, tightly cap the grease tube to ensure dust, debris and moisture do not enter inside. Store the grease in a
dark location not exposed to direct sunlight and keep it away from fire and heating sources.
c
CAUTION
Always use the specified type of grease and apply it to the specified points. Failure to follow the correct greasing
procedures may damage the machine.
1-5
1
Maintenance
2.3 Required tools
Prepare the following tools and items necessary for maintenance.
n
Tool list
: Supplied with machine, : Options
Name Description
Phillips screwdriver Large, small
Slotted (flat-blade) screwdriver Large, small
Hex wrench set 1 set
Grease gun For grease filling (See section 2.2.)
Air blow tool For cleaning (KU4-M8590-00X)
Precision wrench set Used for maintenance of spline shafts.
Cleaning pin Used to clean nozzle holes.
n
Other tool list
: Supplied with machine, : Options
Name Description
Grease (lithium-based grease: NSL) Used to lubricate X and Y axes.
Cleaning paper Use lint-free cleaning paper or cloth that does not leave dust or residue.
Cleaning alcohol Use IPA (isopropyl alcohol) or ethanol.
Marker pen Used for marking when replacing conveyor belt.
n
Safety protective equipment
Name Description
Dust goggles
Always wear when handling IPA or air blow gun.
Dust mask
