YSD_Users_E.pdf - 第361页
The instruction manual of this machine is written for those who operate this machine. Please read this manual carefully for correct operations and pay special attention to safety precautions. After reading through this m…
4.2 Cleaning and greasing the Z axis 3-10
4.2.1 Cleaning and greasing the Z-axis guide, ball screw and shafts 3-10
4.3 Cleaning and greasing the push-up (PU) axis 3-11
4.3.1 Cleaning and greasing he PU-axis ball screw and ball guide 3-11
4.4 Inspecting the board conveyor unit 3-12
4.4.1 Inspecting and cleaning the conveyor belt 3-12
4.4.2 Replacing the conveyor belt 3-13
4.5 Cleaning and greasing the hexagonal spline 3-14
4.6 Inspecting and cleaning the air/mist filters 3-15
4.6.1 Cleaning the filter cup 3-15
4.6.2 Cleaning the air filter and mist filter 3-16
4.7 Controller unit 3-17
4.7.1 Cleaning the filter 3-17
Chapter 4 Maintenance of options
1. Dot station 4-1
1.1 Dot station maintenance 4-1
Chapter 5 Lubrication points
1. Applicable grease and grease gun 5-1
1.1 Applicable grease 5-1
1.2 Grease gun 5-1
2. Lubrication points 5-2
2.1 Head unit 5-2
2.1.1 Z-axis guide, ball screw and shafts 5-2
2.2 X-axis unit 5-3
2.2.1 X-axis guide and ball screw 5-3
2.3 Y-axis unit 5-4
2.3.1 Y-axis guide and ball screw 5-4
2.4 Conveyor unit 5-5
2.4.1 W-axis guide and ball screw 5-5
2.4.2 PU-axis ball guide and ball screw 5-6
The instruction manual of this machine is written for those who operate
this machine.
Please read this manual carefully for correct operations and pay
special attention to safety precautions.
After reading through this manual, please use this manual as an
occasional reference and keep it within reach.
Before using this machine
Contents
1. About this manual i
2. Maintenance list ii
i
Before using this machine
1. About this manual
This manual is comprised of the following chapters.
Before using this machine
This section shows a list of maintenance items and maintenance points.
Chapter 1 Maintenance
Describes conditions and environments to use for maintaining equipment performance. The importance of making daily
checks and performing cleaning tasks is explained. Setups to make before starting maintenance work, consumable parts
and maintenance tools as well as the necessary tools are also described.
Chapter 2 Daily maintenance items
Making checks and cleaning the machine are essential daily maintenance tasks for maintaining equipment performance.
Performing these tasks prevents unforeseen trouble and allows using the machine in an optimum state.
Chapter 3 Periodic maintenance items
Describes maintenance tasks that should be performed periodically to maintain equipment performance. Periodic
maintenance includes "weekly", "monthly" and "yearly" maintenance tasks such as inspection, cleaning and lubrication
of the ball screws and guides.
Chapter 4 Maintenance of options
This chapter describes the maintenance of options.
Chapter 5 Lubrication points
Describes the lubrication points, lubrication tools, lubrication intervals for each axis explained in Chapter 3 "Periodic
maintenance items".
w
WARNING
BEFORE PERFORMING ANY MAINTENANCE TASK, BE SURE TO READ “SAFETY INSTRUCTION” AT THE BEGINNING OF THIS
MANUAL.
c
CAUTION
The contents of these manuals are subject to change without prior notice. Please be sure to contact our sales office or
representative to obtain the latest information on part names and part numbers.