YSD_Users_E.pdf - 第353页
8-33 8 Managing the data n File names automatically saved Item Display item File name example MIS Error log ErrLog20080422.csv Board log PcbLog20080422.csv Program log LotLog20080422.csv Unit log Head Head20080422.csv Co…
8-32
8
Managing the data
3.2.2 Specifying the auto-save destination
Log data can be automatically saved in the specified locations at the time when the machine is turned off. To
specified the save destination, follow these steps.
1
Press the [Software Setting] button on the Setup screen.
The "Setting" screen then appears. Open the [History] tab.
2
Press the [MIS] or [Unit log] button.
• Press the [MIS] button to set the save destination of production log data.
The "MIS Setting" dialog box appears.
• Press the [Unit Log] button to set the save destination of operation log data.
The "Unit Log Setting" dialog box appears.
3
Set the server paths.
1. Press the [Browse] button and specify the path to each folder where the log data will be stored. (You
can directly enter the paths in each path entry box.)
2. After specifying the folders, press the [OK] button.
Log data will be automatically saved in the folders specified here.
Specifying the destination to save log data
[History] tab
[Software Setting] button[History] tab
64832-N7-00
8-33
8
Managing the data
n
File names automatically saved
Item Display item File name example
MIS
Error log ErrLog20080422.csv
Board log PcbLog20080422.csv
Program log LotLog20080422.csv
Unit log
Head Head20080422.csv
Conveyor Conv20080422.csv
TIP
Each file is automatically named when saved. It consists a predetermined log name (ErrLog, PcbLog, Part, Feeder,
etc.) followed by a number representing the date such as "20080422" (April 22, 2008). A new file is created each day.
4
Press the [History] button on the “Setting” screen.
The “Setting Detail History” dialog box then appears.
“Setting Detail History” dialog box
64833-N7-00
8-34
8
Managing the data
5
Select the check boxes as needed.
• “Remember the lot log” check box
When this check box is selected, the board data that had been used when the power was last
turned off is loaded when the power is next turned on. The production lot data will be taken over.
• “Mch line of the Lot log does not output” check box
The lot logs of machines equipped with multiple stages or dual lanes include the “Stage” or “Lane”
column. Select this check box if you do not want to display the “Mch” row in the “Stage” or “Lane”
column.
• “Multi Language Output” check box
When this check box is selected, the production log data can be saved and loaded in multi-
language mode.
• “FullASCII Output” check box
When this check box is selected, incorrect character strings (character strings that cannot be used
with the machine) will be automatically converted into appropriate characters when a file is loaded.
Incorrect character strings (examples): !#$%&@*<>?/
• “History output setting of specified time” check box
Make this setting when specifying the time to output production log data.
Select the “History output setting of specified time” check box and enter the time in 24-hour format
in the ”Specified time” box. Production log data will be output at the specified time every day and
automatically saved.
When the “After the history output, the unit logs are reset” check box is selected, the machine
operation log data (Unit log data) will be reset at the time when production log data is output.
• “Limit size of total history” box
A limit can be set on the total amount of production log data to be saved. An alarm will be issued
when the free space remaining in the destination reaches the limit specified here. Setting this item to
“0” does not place any limit.
6
When finished setting, press the [OK] button.
The display returns to the “Setting” screen, and press the [Close] button to close it.