YSD_Users_E.pdf - 第360页

4.2 Cleaning and greasing the Z axis 3-10 4.2.1 Cleaning and greasing the Z-axis guide, bal l screw and shafts 3-10 4.3 Cleaning and greasing the push-up (PU) axis 3-11 4.3.1 Cleaning and greasing he PU-axis ball screw a…

100%1 / 401
General Contents
Before using this machine
1. About this manual i
2. Maintenance list ii
Chapter 1 Maintenance
1. Maintaining machine performance 1-1
1.1 Essential conditions and working environment 1-1
1.2 Importance of periodic inspections and cleaning 1-2
2. Preparing for maintenance tasks 1-3
2.1 Tools and materials supplied with machine 1-3
2.2 Separately sold options 1-4
2.3 Required tools 1-5
Chapter 2 Daily maintenance items
Before beginning maintenance 2-1
1. Cleaning the nozzles 2-2
1.1 Checking the head dispensing 2-2
1.2 Cleaning the nozzles 2-3
Chapter 3 Periodic maintenance items
1. Weekly inspection 3-1
1.1 Checking the conveyor sensor condition and operation 3-1
1.2 Checking the board clamp condition and operation 3-2
1.2.1 Checking the board clamp condition 3-2
1.2.2 Checking the board clamp operation 3-2
2. Monthly inspection 3-3
2.1 Cleaning and greasing the X and Y axes 3-4
2.1.1 Cleaning and greasing the X-axis ball screw 3-4
2.1.2 Cleaning and greasing the X-axis guide 3-5
2.1.3 Cleaning and greasing the Y-axis ball screws 3-6
2.1.4 Cleaning and greasing the Y-axis guides 3-7
3. Six-month inspection 3-8
3.1 Cleaning the base section filter 3-8
4. One-year inspection 3-9
4.1 Cleaning and greasing the W axis 3-9
4.1.1 Cleaning and greasing the W-axis ball screws 3-9
4.1.2 Cleaning and greasing the W-axis guides 3-9
EMN7155200
4.2 Cleaning and greasing the Z axis 3-10
4.2.1 Cleaning and greasing the Z-axis guide, ball screw and shafts 3-10
4.3 Cleaning and greasing the push-up (PU) axis 3-11
4.3.1 Cleaning and greasing he PU-axis ball screw and ball guide 3-11
4.4 Inspecting the board conveyor unit 3-12
4.4.1 Inspecting and cleaning the conveyor belt 3-12
4.4.2 Replacing the conveyor belt 3-13
4.5 Cleaning and greasing the hexagonal spline 3-14
4.6 Inspecting and cleaning the air/mist filters 3-15
4.6.1 Cleaning the filter cup 3-15
4.6.2 Cleaning the air filter and mist filter 3-16
4.7 Controller unit 3-17
4.7.1 Cleaning the filter 3-17
Chapter 4 Maintenance of options
1. Dot station 4-1
1.1 Dot station maintenance 4-1
Chapter 5 Lubrication points
1. Applicable grease and grease gun 5-1
1.1 Applicable grease 5-1
1.2 Grease gun 5-1
2. Lubrication points 5-2
2.1 Head unit 5-2
2.1.1 Z-axis guide, ball screw and shafts 5-2
2.2 X-axis unit 5-3
2.2.1 X-axis guide and ball screw 5-3
2.3 Y-axis unit 5-4
2.3.1 Y-axis guide and ball screw 5-4
2.4 Conveyor unit 5-5
2.4.1 W-axis guide and ball screw 5-5
2.4.2 PU-axis ball guide and ball screw 5-6
The instruction manual of this machine is written for those who operate
this machine.
Please read this manual carefully for correct operations and pay
special attention to safety precautions.
After reading through this manual, please use this manual as an
occasional reference and keep it within reach.
Before using this machine
Contents
1. About this manual i
2. Maintenance list ii