YSD_Users_E.pdf - 第43页
1-3 1 Part names and functions 2. Operation panel and data input unit Operation panels and operation display screens for data inputs are provided at both the front and rear of the machine. The functions of these units ar…
1-2
1
Part names and functions
n
Pressure gauge
See “7. Air pressure regulator unit” in this chapter.
• Supply air pressure (upper reading): 0.40MPa (0.40MPa to 0.41MPa)
• Pressure-drop detection level (lower reading): 0.33MPa
n
Head assembly
Dispenses adhesive using the dispenser heads installed at the lower end of the head assembly. It is also equipped with a
camera that recognizes marks on the boards. (See "3. Head assembly" in this chapter.)
n
Main power switch
Turns the machine power on or off. The power is on when this switch is turned to the right.
c
CAUTION
Wait at least 2 seconds before turning this power switch back on after turning it off.
n
Front operation panel
See “4. Front operation panel” in this chapter.
1-3
1
Part names and functions
2. Operation panel and data input unit
Operation panels and operation display screens for data inputs are provided at both the front and rear of
the machine. The functions of these units are explained below.
Operation panel and data input unit
Operation panel buttons
Touch pen
Touch pen holder
Keyboard (option)
Keyboard connector
Operation display
63101-N7-10
1-4
1
Part names and functions
2.1 Operation panel buttons
The operation panel buttons are provided on the front and rear of the machine to run major commands
frequently used to operate the machine. Each button is lit while turned on.
Operation panel buttons
63102-N7-00
n
Operation panel button functions
Button name Use the button to: OFF ON
READY
Release emergency stop and turn the
servo on.
• SERVO OFF
(Motor power OFF)
• SERVO ON
(Motor power ON)
RESET
Stop automatic operation and return to
standby for board production.
• Machine is in normal
operation or stopped.
• Machine has been reset.
START (green)
Start automatic operation according to
board data.
• Machine is stopped.
• Machine is in normal
operation.
[Flash]
Pause or step operation
STOP (Red/White)
Interrupt automatic operation. (Press the
[START] button to resume operation.)
• Machine is in normal
operation.
• Error occurred.
ERROR CLEAR
(Yellow/Blue)
Stop buzzer sound and clear error
screen.
• Machine is in normal
operation.
• Error occurred.
EMERGENCY STOP
Trigger an emergency stop. Turn to the
right to release it.