YSD_Users_E.pdf - 第397页
5-3 5 Lubrication points 2.2 X-axis unit 2.2.1 X-axis guide and ball screw X-axis guide X-axis guide X-axis lubrication points Guide and ball screw Grease nipples (large): 2 places Grease nipples (small): 2 places Grease…
5-2
5
Lubrication points
2. Lubrication points
This section describes lubrication points, intervals and procedures.
2.1 Head unit
2.1.1 Z-axis guide, ball screw and shafts
Z-axis lubrication points
Guide, ball screw and shafts
Z-axis guide
Grease gun:
Manual lubrication:
Z-axis ball screw
Spline shafts
53502-N7-00
Lubrication section Lubrication point Interval Procedure
Z-axis guide 2 or 3 1 year Apply a thin coat of grease by hand.
Z-axis ball screw 2 or 3 1 year Apply a thin coat of grease by hand.
Spline shaft 2 or 3 1 year Apply a thin coat of grease by hand.
5-3
5
Lubrication points
2.2 X-axis unit
2.2.1 X-axis guide and ball screw
X-axis guide
X-axis guide
X-axis lubrication points
Guide and ball screw
Grease nipples (large): 2 places
Grease nipples (small): 2 places
Grease gun:
Manual lubrication:
X-axis ball screw
Grease nipple (large): 1 place
53503-N7-00
Lubrication section Lubrication point Interval Procedure
Guide
2
Once a month
Grease gun: Standard nozzle
2 Grease gun: Bent type nozzle
Ball screw 1 Grease gun: Standard nozzle
5-4
5
Lubrication points
2.3 Y-axis unit
2.3.1 Y-axis guide and ball screw
Y-axis lubrication points
Grease nipple for
Y-axis guide
Grease nipple for
Y-axis guide
Grease gun:
Manual lubrication:
Grease nipple for
Y-axis guide
Grease nipple for
Y-axis ball screw
Rear
Front
Grease nipple for
Y-axis ball screw
53504-N7-00
Lubrication section Lubrication point Interval Procedure
Guide 4
Once a month Grease gun: Standard nozzle
Ball screw 2