CM602all_EJM8AESM_Service Manual.pdf - 第1004页
(1) Select [Tray feeder] from the machine parameter teach menu. Press [Jig setting]. (2) Turn off (O) the servo switch. (3) Open the safety cover. (4) Put Nozzle 1003 on Head 1. (5) Close the safety cover. (6) Turn on (I…
Tray
kgs.
7
Min.
0
7-2-2 Direct Tray Pickup Position Teaching
Removal/Disassembly
70
Nozzle 1003
Teaching
Min. Min.
Direct Tray
• This section describes the procedures for teaching the direct tray pickup position.
Total Part Weight
Assembly/Adjustment
Tool
Jig
Min.
Caution
Danger
Warning
EJM8A-E-SMA070202-A01-00
Page 7-2-2-1
(1) Select [Tray feeder] from the
machine parameter teach menu. Press
[Jig setting].
(2) Turn off (O) the servo switch.
(3) Open the safety cover.
(4) Put Nozzle 1003 on Head 1.
(5) Close the safety cover.
(6) Turn on (I) the servo switch.
(7) Press [Height teach].
• Height teaching will be performed.
(8) Press [Position teach].
• Position teaching in the X and Y
directions will be performed.
Carry out machine parameter teaching.
Main menu/Machine parameter teach/Tray feeder
Height teaching
Position teaching
Remark
Direct Tray
2
1
Put the jig on.
Item
Carry out machine parameter teaching.
Tray
3
4
EJM8A-E-SMA070202-A01-00
Page 7-2-2-2
Tray Direct Tray
RemarkItem
(9) Press [Jig remove].
(10) Turn off (O) the servo switch.
(11) Open the safety cover.
(12) Remove the nozzle from the head.
(5) Close the safety cover.
(6) Turn on (I) the servo switch.
5
Remove the jig.
EJM8A-E-SMA070202-A01-00
Page 7-2-2-3