CM602all_EJM8AESM_Service Manual.pdf - 第99页
within 0.1 to 0.2mm (Teaching on the shuttle and tray side s 117 Check the pickup and delivery position s Cable and Tube Position Cables and Tube s Check the ST40T for operation 118 Basically check only 120 119 [Care whe…
Phillips screwdriver screw
4 pcs.
[Tool]
Tester
Precision screwdriver
[Specifications]
5.05_0 to +0.03
V
[Tool]
Tester
Precision screwdriver
[Specifications]
12.00±0.1
V
[Tool]
Tester
Precision screwdriver
[Specifications]
24.00 to 24.30
V
Check it with TP5V and TGGNG
Check it with TP24V and TP24G
116
115
Check it with TP12V and TGGNG
113
ST40T Inspection Voltage Measureme
n
Remove the cover from the control box cover, which is placed under the shuttle tray.
114
Installation Machine Installation
Item Remark
TP5V red
TGGND black
Tester DC 20V range
TP12V red
TGGND black
Tester DC 20V range
TP24V red
TP24G black
Tester DC 20V range
EJM8A-E-SMA020103-A01-00 Page 2-1-3-30
within 0.1 to 0.2mm
(Teaching on the shuttle and tray side
s
117
Check the pickup and delivery position
s
Cable and Tube Position Cables and Tube
s
Check the ST40T for operation
118
Basically check only
120
119
[Care when the shuttle tray
is set]
Set the shuttle tray delivery
jig on the transfer conveyor.
Adjust the installation angle
of the shuttle tray so that
the two tray nozzles are
placed in the jig.
Cable and Tube Position on the shuttl
e
tray sid
e
How to secure them
:
Machine Installation
Item Remark
Installation
* Adjust it with the magazine cover stopp
e
[If adjustment is necessary:
[Specifications]
With the shutter closed, the
gap from the magazine
stopper to the palette
should be 0.1 to 0.2 mm.
Palette
EJM8A-E-SMA020103-A01-00 Page 2-1-3-31
123
Check warning when the magazine doo
r
122
Open the desired cover.
Make the machine move.
the supply section, or the pickup section is ope
n
Installation Machine Installation
Item Remark
Turn off the servo switch.
Make the machine move.
121
Check that the tray stops when th
e
emergency stop switch is pressed
Turn on the emergency
stop switch. Make the
machine move.
Check that the tray does not move when the servo switch is turned off.
EJM8A-E-SMA020103-A01-00 Page 2-1-3-32