CM602all_EJM8AESM_Service Manual.pdf - 第934页
Adjustable distance: +/- 3 mm (The hole is 3-mm long.) 12 34 Remove the jig from the door Item Remarks Shuttle Tray Tray 17 Allen key 3 mm Screw M4 2 pcs. If it is necessary to adjust the distance, loosen the bolts that …
Measure the distance from the dog to the mechanical stopper.
Install the motor shaft holder.
Tension the belt.
Item Remarks
13
Allen key 3 mm
Allen key 4mm
Screw M4 2 pcs.
Screw M5 2 pcs.
Switch on the power.
Fit the jig on the door switch
connector.
15
Carry out "Return to origin."
(Be sure to keep yourself off the drive section.)
16
Distance from Dog to
Stopper:
9.5 mm ±1 mm
14
Tray Shuttle Tray
Motor axis holder
3
6.5 36.5
(30)
4.5
731.5
727st
－O/R
StrokeOrigin
＋O/R
Mechanical
stopper
Dog
＋soft limit －soft limit
EJM8A-E-SMA070109-A01-00
Page 7-1-9-5
Adjustable distance: +/- 3 mm
(The hole is 3-mm long.)
12
34
Remove the jig from the door
Item Remarks
Shuttle TrayTray
17
Allen key 3 mm
Screw M4 2 pcs.
If it is necessary to adjust the distance, loosen the bolts that are positioned
at the back of the belt clamp, and adjust the distance.
18
Allen key 3 mm
Screw M4 2 pcs.
If it is necessary to adjust the distance more than 3 mm,
loosen the bolts below and move the belt.
19
Carry out "Return to origin." Check the distance.
20
switch connector.
30
B
A=727st
(770)
C
D
E
EJM8A-E-SMA070109-A01-00
Page 7-1-9-6
Item Remarks
Tray Shuttle Tray
21
Allen key 3 mm
M4×8L 3 pcs.
M4×10L 2 pcs.
M4×12L 2 pcs.
Put the cover back on the motor section.
Allen key 3 mm
Phillips screwdriver #2
M4×8L 3 pcs.
M4×10L 2 pcs.
M5×Truss 15L 2 pcs.
22
Put the top cover back on.
Allen key 3 mm
Phillips screwdriver #2
M4×8L 8 pcs.
M4×Truss 10L 2 pcs.
24
Close the maintenance door.
Allen key 3 mm
M4 x 10L 1 pc.
Connect the door switch connector.
23
Put the cover back on.
Door switch of
Delivery position
EJM8A-E-SMA070109-A01-00
Page 7-1-9-7