CM602all_EJM8AESM_Service Manual.pdf - 第701页
Machinery Part Replacement Remarks 12-Nozzle Head Teaching Item Press [Height teach]. • The nozzle 130S moves down and measures the height of the upper surface of the nozzle changer. Press [Jig remove]. Remove the jig fr…
Machinery Part Replacement
Remarks
Press [Nozzle changer].
Select the stage to teach.
Press [Jig setting].
• The upper shutter of the nozzle changer
is opened.
• Fit the nozzle-change-position-teaching
jig on the nozzle changer.
• Fit the Nozzle 130S on the number 3
nozzle holder of the stage to teach.
Press [Exchange pos tch].
• The camera recognizes the fiducial
mark of the nozzle changer, and then the
nozzle-change-position-teaching jig.
12-Nozzle Head Teaching
3
4
1
Item
2
Caution
The convex portion of
the jig should face
downwards.
Main body of nozzle changer
If the jig is not fit on the nozzle changer securely, it
may interfere with the shutter when the changer
shutter is closed.
Jig-mounting
position
Recognition
mark
Jig-mounting
position
Recognition
mark
EJM8A-E-SMA051110-A01-00
Page 5-11-10-2
Machinery Part Replacement
Remarks
12-Nozzle Head Teaching
Item
Press [Height teach].
• The nozzle 130S moves down and
measures the height of the upper surface
of the nozzle changer.
Press [Jig remove].
Remove the jig from the nozzle changer,
and the nozzle from the nozzle holder.
5
6
EJM8A-E-SMA051110-A01-00
Page 5-11-10-3
Tool
Jig
5-11-11
Mounting Position
This section describes the procedures for teaching the mounting position.
* When the machine is warmed up for some reason such as a test run, cool down the
machine by powering down the machine and opening the four upper covers before
teaching.
* When teaching the machine that has been left powered down for some time, carry out
a one-cycle test run using the "Mount position teaching - Warmup operation."
Mounting position
correcting data
Light Box
Glass board
(240x215 TH: 2.4)
Component 1005R 2 pcs.
Component 0603R 2pcs.
Nozzle 110S 48 pcs.
Nozzle 205S 48 pcs.
Double-sided tape
Machinery Part Replacement 12-Nozzle Head Teaching
Phillips screwdriver #2
Dange
r
Warning
Caution
EJM8A-E-SMA051111-A01-00
Page 5-11-11-1