CM602all_EJM8AESM_Service Manual.pdf - 第889页
Precisely position the transfer head and the shuttle head. See Teaching sections. 28 Press [Offset set]. Offset range: -3.5 to 3.5 Details: Shuttle Tray Teaching 27 as necessary. Align the shuttle head sensor LED with th…
Install the upper part of the tray feeder to the machine and tighten the bolts.
Re-confirm the levelness. Tighten the bolts that are half tightened.
Item Remarks
Tray Shuttle Tray
24
Carry out machine parameter teaching.
23
Remove the sheet from the transfer
section. Mount the jig.
22
Allen key 4 mm
Bracket
Screw M5x10L 2 pcs.
Allen key 6 mm
Screw M8x40L 2 pcs.
Screw M8x20L 2 pcs.
21
Tighten them.
EJM8A-E-SMA070101-A01-00
Page 7-1-1-7
Precisely position the transfer head
and the shuttle head.
See Teaching sections.
28
Press [Offset set].
Offset range: -3.5 to 3.5
Details:
Shuttle Tray Teaching
27
as necessary.
Align the shuttle head sensor LED with the hole of the jig, using the inching keys
26
determine the key rsps.
Key rsps:
0.01, 0.10, 1.00
According to how much the shuttle head is out of place,
25
Key rsps:
0.01, 0.10, 1.00
Carry out the "Delivery position" teaching.
Item Remarks
Tray Shuttle Tray
Unlock switch
Inching keys
EJM8A-E-SMA070101-A01-00
Page 7-1-1-8
7-1-2 Shuttle Tray Pickup Position Teaching
Shuttle TrayTray
• This section describes the procedures for teaching the shuttle tray pickup position
Total Part Weight
Assembly/Adjustment
・Tools
・Jigs
Min.
00
Pickup position adjustment
jig
Nozzle jig
Removal/Disassembly
7
None
Teaching
Min. Min. kgs.
7
Min.
Dange
r
Warning
Caution
EJM8A-E-SMA070102-A01-00
Page 7-1-2-1