CM602all_EJM8AESM_Service Manual.pdf - 第528页
Machinery Part Replacement Remarks Item Z Unit (3-nozzle type) Switch on the main power. Check the valve function. 18 When Vacuum Pump ON, Vacuum ON and Mount Blow OFF, vacuum should be created at the end of the nozzle. …
Machinery Part Replacement
Remarks
Item
Z Unit (3-nozzle type)
Connect the valve connector.
Secure the cables with cable ties.
2-000170
Nipper
Cable tie
Put the head cover back on.
Phillips screwdriver #1
Phillips screwdriver #2
Screw M3 2 pcs.
M4 2 pcs.
Put the feeder cover back on.
ｶﾊﾞｰ達
Phillips screwdriver #2
Screw M4 2 pcs.
13
14
15
16
EJM8A-E-SMA050506-A01-00
Page 5-5-6-5
Machinery Part Replacement
Remarks
Item
Z Unit (3-nozzle type)
Switch on the main power.
Check the valve function.
18
When Vacuum Pump ON, Vacuum ON and Mount Blow OFF, vacuum should be created at the end of the nozzle.
When Vacuum Pump ON, Vacuum OFF and Mount Blow ON, the end of the nozzle should blow.
17
EJM8A-E-SMA050506-A01-00
Page 5-5-6-6
5-5-7 Z Drive Unit Linear-Rail Replacement
Phillips screwdriver #1
Phillips screwdriver #2
Allen key 1.5 mm
Allen key 2 mm
Allen key 3 mm
Allen key 4 mm
Wrench 13 mm
Torque gauge
Micrometer
Z-plate positioning jig
This section describes the procedures for replacing the Z drive unit linear.
Machinery Part Replacement
Z Unit (3-nozzle type)
• Tools
• Jig
Part Weight
min.
kgs
80 min. 80
Removal/Disassembly Assembly/Adjustment
Teaching Total Time
min. 160 min.
Dange
r
Warning
Caution
EJM8A-E-SMA050507-A01-00
Page 5-5-7-1