CM602all_EJM8AESM_Service Manual.pdf - 第303页
Maintenance Adjustment Light Transfer-Head Assembly (3 nozzles) Remarks Item Press [Load Head]. Select the desired stage. Press [Unlock] and [Jig setting] simultaneously. Set the jig on the selected stage. Check that the…
Maintenance Adjustment Light Transfer-Head Assembly (3 nozzles)
Remarks
Item
Setting Input value 1
Decimal Point Position
9
10
Check that "DSP1" is displayed
after Input value 1 is set.
Check that "DEC-P" is displayed
after Display value 1 is set.
Check the position of the decimal
point. To determine, press
ESC
Press several times until
the number is displayed.
Finish the setup.
Proceed to load coefficient teaching.
Pres s to highlight the digit
be changed.
To set "00980," press
To determine, press
Press to highlight the digit
to be changed.
EJM8A-E-SMA040310-A01-00
Page4-3-10-5
Maintenance Adjustment Light Transfer-Head Assembly (3 nozzles)
Remarks
Item
Press [Load Head].
Select the desired stage.
Press [Unlock] and [Jig setting] simultaneously.
Set the jig on the selected
stage.
Check that the number of
the head to be taught is
displayed in the [Head No.]
box.
If the number is wrong,
press the [Head No] box
until the desired number is
displayed.
Press [Unlock] and [Nozzle set] simultaneously.
Set Nozzle 1003 on the
head to be taught.
13
14
11
12
EJM8A-E-SMA040310-A01-00
Page4-3-10-6
Maintenance Adjustment Light Transfer-Head Assembly (3 nozzles)
Remarks
Item
Press [RESET/TEACH] on the monitor below:
Before pressing
[RESET/TEACH], press
[ESC] until "MAX" is
selected.
Press [Unlock] and [Load Teach (50)] simultaneously.
Press [Teach data input].
Enter the jig value.
Enter the value displayed
on the monitor into the
flashing box on the screen
at left.
F1: 4.5 N to 6.0 N
15
16
17
18
EJM8A-E-SMA040310-A01-00
Page4-3-10-7