CM602all_EJM8AESM_Service Manual.pdf - 第947页
Tray Shuttle Tray 7-1-12 Extension-axis Driver Replacement Tool Jig 50 Min. 30 Min. This section describes the procedures for replacing the extension-axis driver. Total Time Part Weight Teaching Assembly/Adjustment Remov…
See Section 7-1-2 "Shuttle
Tray Pickup Position
Teaching."
Carry out the 'Pickup position" teaching.
Phillips screwdriver #2
Screw M4 12 pcs
17
Phillips screwdriver #2
Allen key 3 mm
Screw M4 2 pcs.
M4x10L 8 pcs.
Remarks
Shuttle Tray
19
Put the top cover back on.
Item
18
Put the cover back on.
Tray
+
-
EJM8A-E-SMA070111-A01-00
Page 7-1-11-6
Tray Shuttle Tray
7-1-12 Extension-axis Driver Replacement
Tool
Jig
50
Min.
30 Min.
This section describes the procedures for replacing the extension-axis driver.
Total Time Part Weight
Teaching
Assembly/AdjustmentRemoval/Disassembly
0
Min. Min.
20
None
Phillips screwdriver #2
Precision screwdriver
Nipper
Allen key M4
kgs
2.0
Dange
r
Warning
Caution
EJM8A-E-SMA070112-A01-00
Page 7-1-12-1
Tray Shuttle Tray
3
4
Remove the connector from the right side of the box.
2
1
Item
Remove all connectors from the front board.
Phillips precision
screwdriver
Connector screw
Remove the front and the side covers from the control box.
Phillips screwdriver #2
Screw M4 4 pcs.
90578
Power down the machine.
Remarks
EJM8A-E-SMA070112-A01-00
Page 7-1-12-2