CM602all_EJM8AESM_Service Manual.pdf - 第770页

Item Level the sensor. Lead Checker Optional Accessory Parts Replacement 28 Remove the iron plate from the head. Allen key 3 mm Screw M4 1 pc. Iron plate for holding the magnetic stand Phillips screwdriver #2 Screw M4 2 …

100%1 / 1093
Lead Checker
to the top of the sensor.
Specifications:
H: 174mm±0.2mm
Allen key 3 mm
Screw M4 2 pcs.
24
Item
Phillips screwdriver #2
Truss screw 6 mm
4 pcs.
(3 pcs. for AF only)
Remark
Optional Accessory Parts Replacement
Lightly tighten Sensor (4). Adjust the height from the body frame
Put the lower box cover back on.
Put all lower chutes back on.
27
Switch on the power.
25
26
Allen key 4 mm
Screw M5 x 12 mm
4 pcs.
Thick washer 43 pcs.
H
Chute holding
section (Left)
Chute holding
section (Right)
EJM8A-E-SMA060301-A01-00
Page　6-3-1-10
Item
Level the sensor.
Lead CheckerOptional Accessory Parts Replacement
28
Remove the iron plate from the head.
Allen key 3 mm
Screw M4 1 pc.
Iron plate for holding the
magnetic stand
Phillips screwdriver #2
Screw M4 2 pcs.
Put the NG box bracket back on.
Put the feeder cover back on.
30
31
Allen key 3 mm
Allen key 4 mm
Screw M4 x 10 3 PCs.
Thick washer 3 pcs.
Screw M5 2 pcs.
Put the chute back on.
See Section 4-1-9
"Lead Checker Height
Adjustment"
Remark
28
EJM8A-E-SMA060301-A01-00
Page　6-3-1-11
6 Option Accessory Parts
Replacement
(Component Height Control Device)
This chapter describes the procedures for replacing the
optional accessory parts.
EJM8A-E-SMAA-0002
Confidential
Additional version