CM602all_EJM8AESM_Service Manual.pdf - 第546页
Machinery Part Replacement ・ Tools Phillips screwdriver #1 Phillips screwdriver #2 Allen key 3 mm ・ Jig FM-1112 Head Camera Height Adjusting Jig Head Camera Unit 5-6-1 Head Camera and LED Replacement This section describ…
Refer to "Replacing a Set of Head Units."
18
Install a set of head units.
Tools and Specifications
Section 5-5-1
17
Connect the connectors.
Tools and Specifications
Item Remarks
Machinery Part Replacement
Z Unit (3-nozzle type)
EJM8A-E-SMA050509-A01-00
Page 5-5-9-6
Machinery Part Replacement
・Tools
Phillips screwdriver #1
Phillips screwdriver #2
Allen key 3 mm
・Jig
FM-1112
Head Camera Height
Adjusting Jig
Head Camera Unit
5-6-1 Head Camera and LED Replacement
This section describes the procedures for replacing the head camera and the LED.
Caution
Dange
r
Warning
Head Camera Uni
t
5-6
Assembly
Adjustment
42min.
Teaching
min.
Total Time Weight of
Part
Removal
Disassembly
20min.
62min.
kgs
EJM8A-E-SMA050601-A01-00
Page 5-6-1-1
Machinery Part Replacement
Remarks
Switch off the power.
Remove the head cover.
2
Phillips screwdriver #1
Phillips screwdriver #2
Screw M3 8 pcs.
Screw M4 4 pcs.
Remove the connector.
Phillips screwdriver #1
Connector screws
Be careful not to let the camera unit fall.
Allen key 3 mm
Screw M4 4 pcs.
Remove the camera holding screws, holding the camera unit.
4
3
Head Camera Unit
1
Item
EJM8A-E-SMA050601-A01-00
Page 5-6-1-2