CM602all_EJM8AESM_Service Manual.pdf - 第951页
14 Close the front cover. Fix it in place. 16 Phillips precision screwdriver Connector screws Connect all connectors to the front board. 15 Connect the connectors to the right side of the box. Phillips screwdriver #2 Ite…
Tray Shuttle Tray
10
11
12
MR-J2-20A-N26
Allen key 4 mm
Screw M5 2 pcs.
Connect all driver connectors.
Install the box.
Item Remarks
Phillips precision
screwdriver
Connector screws
Install the driver. Connect the relay connectors.
9
Phillips precision
screwdriver
Connector screws
Remove the relay connectors and the
driver holding screws.
Be careful not to let the
cable be caught.
Phillips precision
screwdriver
Connector screws
Fix the box and the cable in place.
EJM8A-E-SMA070112-A01-00
Page 7-1-12-4
14
Close the front cover. Fix it in place.
16
Phillips precision
screwdriver
Connector screws
Connect all connectors to the front board.
15
Connect the connectors to the right side of the box.
Phillips screwdriver #2
Item Remarks
13
Nipper
Connect the cable connectors on the right side.
Secure the cable ties.
Tray Shuttle Tray
EJM8A-E-SMA070112-A01-00
Page 7-1-12-5
18
Power up the machine.
17
Phillips screwdriver #2
Screw M4 4 pcs.
90578
Put the front and the side covers back on.
Item Remarks
Tray Shuttle Tray
EJM8A-E-SMA070112-A01-00
Page 7-1-12-6