CM602all_EJM8AESM_Service Manual.pdf - 第163页
Maintenance Adjustment Main Body Beam This section describes the procedures for adjusting the angle of the nozzle holders. ・ Tools Phillips screwdriver #2 Allen key 3 mm Allen key 1.5 mm ・ Jig Nozzle (120 or 130) 8 pcs. …
Maintenance Adjustment Main Body Beam
Remarks
Item
Put back the sensor covers.
Phillips screwdriver #2
Screw M4 8 pcs.
Put back the feeder cover.
Phillips screwdriver #2
Screw M4 2 pcs.
10
9
EJM8A-E-SMA040107-A01-00
Page 4-1-7-4
Maintenance Adjustment Main Body Beam
This section describes the procedures for adjusting the angle of the nozzle holders.
・Tools
Phillips screwdriver #2
Allen key 3 mm
Allen key 1.5 mm
・Jig
Nozzle (120 or 130)
8 pcs.
Nozzle Angle Adjusting
Jig
Time taken for adjustment:
15 min.
Part weight: - kgs.
4-1-8 Nozzle Holder Angle Adjustment
Assembly
Adjustment
8min.
Teaching
10min.
Total Time Weight of
Part
Removal
Disassembly
7min.
25min.
kgs
Caution
Dange
r
Warning
EJM8A-E-SMA040108-A01-00
Page 4-1-8-1
Maintenance Adjustment Main Body Beam
Remarks
Remove the feeder cover and the chute.
Phillips screwdriver #2
Allen key 3 mm
Screw M4 2 pcs.
Screw M4-10 3 pcs.
Thick washer 3 pcs.
Return the machine to the origin.
Turn off the SERVO switch.
Set the nozzles.
Nozzle 8 pcs.
3
4
1
Item
2
EJM8A-E-SMA040108-A01-00
Page 4-1-8-2