CM602all_EJM8AESM_Service Manual.pdf - 第988页
Tools Jigs Removal/Disassembly Assembly/Adjustment Teaching Total Part Weight Min. Min. Min. 20 20 kgs. 40 Min. 7-1-18 Removing the Control Box. Shuttle Tray Tray T his section describes the procedures for removing the c…
For the procedures from this step onwar
d
see "Installing the Shuttle Tray Feeder"
Section 7-1-1
"Installing the Shuttle Tray
Feeder"
46
Connect the shuttle tray.
Tray Shuttle Tray
After changing the shuttle tray setting,
Item Remarks
45
power down and power up the machine.
EJM8A-E-SMA070117-A01-00 Page 7-1-17-13
Tools
Jigs
Removal/Disassembly Assembly/Adjustment
Teaching
Total Part Weight
Min. Min. Min.
2020
kgs.
40
Min.
7-1-18 Removing the Control Box.
Shuttle TrayTray
This section describes the procedures for removing the control box.
None
Phillips screwdriver #1
Phillips screwdriver #2
Allen key 3 mm
Dange
r
Warning
Caution
EJM8A-E-SMA070118-A01-00
Page 7-1-18-1
Open the right side cover of the control box.
2
1
Tray
Open the cover of the control box section.
Shuttle Tray
Remove all connectors from the
front side of the board.
Phillips screwdriver #2
Screw M4 4 pcs.
Phillips screwdriver #2
Screw M4 4 pcs.
Remark
Switch off the power.
Item
3
4
EJM8A-E-SMA070118-A01-00
Page 7-1-18-2