CM602all_EJM8AESM_Service Manual.pdf - 第224页
Maintenance Adjustment Light Transfer-Head Assembly (8 nozzles) Remarks Item Change stages. Select Stage B. Carry out Steps 2 to 8 in the same way as Stage A. Check the data after teaching. The offsets are entered automa…
Maintenance Adjustment Light Transfer-Head Assembly (8 nozzles)
Remarks
Item
Press [Xyplane cal teach].
The jig is clamped in the Z direction.
The AF head recognizes the dots on the
jig. Then the AR head recognizes them.
Press [Jig remove].
Both AF and AR heads move away.
Once they finish moving away, remove
the jig.
Press the "Return" key.
Press the "Run" key.
5
6
7
8
EJM8A-E-SMA040206-A01-00
Page 4-2-6-3
Maintenance Adjustment Light Transfer-Head Assembly (8 nozzles)
Remarks
Item
Change stages.
Select Stage B.
Carry out Steps 2 to 8 in the same way
as Stage A.
Check the data after teaching.
The offsets are entered automatically into the screen below:
Offset range:
X: -0.5 mm to +0.5 mm
Y: -0.5 mm to +0.5 mm
9
11
10
EJM8A-E-SMA040206-A01-00
Page 4-2-6-4
s
4-2-7 Mounting Position
Maintenance Adjustment
Light Transfer-Head Assembly (8 nozzles)
This section describes the procedures for teaching the mounting position.
Total time Part weight
Mounting position
correcting data
Light Box
Glass board
(240x215 TH: 2.4)
Component 1005R 2 pcs.
Component 0603R 2pcs.
Nozzle 110 16 pcs.
Nozzle 205A 16 pcs.
Double-sided tape
Phillips screwdriver #2
Min. Min.
kgs
.
90 Min.Min.
Removal/Disassembly
90
Tool
Jig
Teaching
・Jigs
・Jigs
Assembly/Adjustment
Dange
r
Warning
Caution
EJM8A-E-SMA040207-A01-00
Page 4-2-7-1