CM602all_EJM8AESM_Service Manual.pdf - 第304页
Maintenance Adjustment Light Transfer-Head Assembly (3 nozzles) Remarks Item Press [RESET/TEACH] on the monitor below: Before pressing [RESET/TEACH], press [ESC] until "MAX" is selected. Press [Unlock] and [Loa…
Maintenance Adjustment Light Transfer-Head Assembly (3 nozzles)
Remarks
Item
Press [Load Head].
Select the desired stage.
Press [Unlock] and [Jig setting] simultaneously.
Set the jig on the selected
stage.
Check that the number of
the head to be taught is
displayed in the [Head No.]
box.
If the number is wrong,
press the [Head No] box
until the desired number is
displayed.
Press [Unlock] and [Nozzle set] simultaneously.
Set Nozzle 1003 on the
head to be taught.
13
14
11
12
EJM8A-E-SMA040310-A01-00
Page4-3-10-6
Maintenance Adjustment Light Transfer-Head Assembly (3 nozzles)
Remarks
Item
Press [RESET/TEACH] on the monitor below:
Before pressing
[RESET/TEACH], press
[ESC] until "MAX" is
selected.
Press [Unlock] and [Load Teach (50)] simultaneously.
Press [Teach data input].
Enter the jig value.
Enter the value displayed
on the monitor into the
flashing box on the screen
at left.
F1: 4.5 N to 6.0 N
15
16
17
18
EJM8A-E-SMA040310-A01-00
Page4-3-10-7
Maintenance Adjustment Light Transfer-Head Assembly (3 nozzles)
Remarks
Item
Press the "Return" key.
Press [Unlock] and [Load Teach (200)] simultaneously.
Press [Teach data input].
Enter the jig value.
Enter the value displayed
on the monitor into the
flashing box on the screen
at left.
F2: 15.0 N to 25.0 N
19
20
21
22
EJM8A-E-SMA040310-A01-00
Page4-3-10-8