CM602all_EJM8AESM_Service Manual.pdf - 第494页
Machinery Part Replacement Z Unit (3-nozzle type) Assembly/Adjustment This section describes the procedures for replacing the stroke end sensor Stroke End Sensor Replacement 5-5-1 Min. Phillips screwdriver #1 Phillips sc…
Item
Put the feeder cover back on.
5
Phillips screwdriver #2
Screw M4 2 pcs.
Remarks
Tool/Spec/Installation
Machinery Part Replacement
Light Transfer-Head Assembly (3-nozzle type)
EJM8A-E-SMA050404-A01-00
Page 5-4-4-3
Machinery Part Replacement
Z Unit (3-nozzle type)
Assembly/Adjustment
This section describes the procedures for replacing the stroke end sensor
Stroke End Sensor Replacement5-5-1
Min.
Phillips screwdriver #1
Phillips screwdriver #2
Allen key 2.5 mm
Allen key 3 mm
Caliper
None
• Tools
• Jigs
Removal/Disassembly
10
Min.
10
Min.
Kg
Teaching Total Time Part Weight
Min.
20
Z Unit (3-nozzle type)
5-5
Caution
Danger
Warning
EJM8A-E-SMA050501-A01-00
Page 5-5-1-1
Machinery Part Replacement
Z Unit (3-nozzle type)
1
Remove the feeder cover.
Switch off the power.
Phillips screwdriver #1
Phillips screwdriver #2
Screw M3 2 pcs
Screw M4 2 pcs.
4
3
2
Allen key 3 mm
Screw M4 3 pcs.
Phillips screwdriver #2
Screw M4 2 pcs.
Remove the head cover.
Tool/Spec/Installation
Item Remarks
Tool/Spec/Installation
Tool/Spec/Installation
Remove the cover holding screws.
Tool/Spec/Installation
EJM8A-E-SMA050501-A01-00
Page 5-5-1-2