CM602all_EJM8AESM_Service Manual.pdf - 第813页
Option Part and Accessory Replacement Component-Thickness-Measuring Unit Remark 16 Item Press [UNLOCK] on the operation panel and [Run] simultaneously. 16 EJM8A-E-SMA060403-A01-00 Page 6-4-3-6
Option Part and Accessory Replacement
Component-Thickness-Measuring Unit
Remark
• The head moves to the removal
position.
Turn off (O) the servo switch.
Open the safety cover.
Remove the nozzles.
Close the safety cover.
Turn on (I) the servo switch. * Repeat Steps 5 to 14 for
the other tables.
Press the function key .
Item
14
15
13
Press [UNLOCK] on the operation panel and [Jig remove] simultaneously.
12
12
15
EJM8A-E-SMA060403-A01-00
Page 6-4-3-5
Option Part and Accessory Replacement
Component-Thickness-Measuring Unit
Remark
16
Item
Press [UNLOCK] on the operation panel and [Run] simultaneously.
16
EJM8A-E-SMA060403-A01-00
Page 6-4-3-6
Option Part and Accessory Replacement
Component-Thickness-Measuring Unit
Remark
Press [Z-axis origin offset].
Select the table to be taught.
Press [Each head].
(B) When one Nozzle 130S is used with the component-thickness sensor (Head-mounted type) used (Each-
head teaching):
1
Item
2
3
* A component-thickness sensor is (head-mounted type) is an option for the high-speed head (12-nozzle
type). The following procedures are applied to the high-speed head (12-nozzle type) only.
Each head
Gang
Head No.1
Each head
Gang
Head No.1
1
2
3
EJM8A-E-SMA060403-A01-00
Page 6-4-3-7