CM602all_EJM8AESM_Service Manual.pdf - 第964页
Tray Tool Jig Phillips screwdriver #2 Allen key 3 mm Ruler 150 mm Ruler 300 mm Teaching Min. Min. kgs Min. Assembly/Adjustment This section describes the procedures for replacing the timing belt for the transfer section.…
Item
9
Once the mechanical adjustment is complete,
carry out machine parameter teaching.
Remarks
See Section 7-1-2. "Shuttle
Tray Pickup Position
Teaching."
Shuttle TrayTray
EJM8A-E-SMA070114-A01-00
Page 7-1-14-4
Tray
Tool
Jig
Phillips screwdriver #2
Allen key 3 mm
Ruler 150 mm
Ruler 300 mm
Teaching
Min. Min.
kgs
Min.
Assembly/Adjustment
This section describes the procedures for replacing the timing belt for the transfer section.
Total Time Part Weight
Removal/Disassembly
0
Min.
Shuttle Tray
7-1-15 Transfer-Section Timing Belt Replacement
Dange
r
Warning
Caution
EJM8A-E-SMA070115-A01-00
Page 7-1-15-1
Tray
2
1
Phillips screwdriver #2
Allen key 5 mm
Truss screw M4 4 pcs.
M6x30L 2 pcs.
Remark
Pull out the feeder change cart.
Allen key 2.5 mm
M3 4 pcs.
Allen key 2.5 mm
M3 2 pcs.
Remove the connector.
Item
Shuttle Tray
Remove the belt clamp from the transfer head.
bolt and the transfer section only.
If the "return-to-origin" operation cannot be carried out, remove the holding
Remove the motor holder.
3
4
EJM8A-E-SMA070115-A01-00
Page 7-1-15-2