CM602all_EJM8AESM_Service Manual.pdf - 第243页
Maintenance Adjustment Light Transfer-Head Assembly (8 nozzles) This section describes the procedures for determining the nozzle exchange position. Tools None J ig Non registered Nozzle Changer Position Recognition Jig N…
Maintenance Adjustment Light Transfer-Head Assembly (8 nozzles)
Remarks
Item
Press the [Return] key.
To save the machine
parameter, press the
[Return] key.
Press [Unlock] and [Run] simultaneously.
All axes of the selected stage return to
the origin.
The offsets are entered automatically into the screen below:
Offset range:
X: +/- 1.0 mm
Y: +/- 1.0 mm
Z: +/- 1.0 mm
9
10
11
EJM8A-E-SMA040208-A01-00
Page 4-2-8-4
Maintenance Adjustment Light Transfer-Head Assembly (8 nozzles)
This section describes the procedures for determining the nozzle exchange position.
Tools
None
Jig
Non registered
Nozzle Changer Position
Recognition Jig
Nozzle 120 or 130
4-2-9 Nozzle Exchange Position
Clean the upper surface of the nozzle changer beforehand.
Assembly
A
d
j
ustment
min.
Teaching
5 min.
Total Time Weight of
Part
Removal
Disassembl
y
min.
5 min.
kgs
Caution
Dange
r
Warning
EJM8A-E-SMA040209-A01-00
Page4-2-9-1
Maintenance Adjustment Light Transfer-Head Assembly (8 nozzles)
Remarks
Press [Nozzle exchange pos].
Select the stage to be taught.
Press [Unlock] and [Jig setting] simultaneously.
The head moves away and the nozzle-
changer cover opens.
Put the jigs into the nozzle changer.
Put the jigs into Nozzle
Changer Positions 11 and
66.
Put Nozzle 130 into
Nozzle Position 3.
3
4
1
Item
2
EJM8A-E-SMA040209-A01-00
Page4-2-9-2