Smart Graphical User Interface (SmartG) Overview_rev1.pdf - 第62页

Machine Setting (Barcode)

2 options:

● Use Board Specific Setting (User can Import file .brc to run this feature)

● Use Machine Settings (User can use this configuration machine barcode setting)

Figure 51: Reader Specific (Barcode) Parameter in SmartG

Machine Setting (Calibration)

Figure 52: Calibration Setting Interface

Machine Setting (Calibration)

When Alignment Style is

set to Gridlines, this sets

the spacing between the

grids. This is set to 5000

by default

When Alignment

Style is set to

Gridlines, this

sets the number

of ticks between

each Grid. This is

set to 5 by default

Z height customization:

Recommended value: 6

Home: To make a default

of Z height

Sets the accelerations of the XY Table

in the X and Y directions in meters per

second. Recommended values for X

and Y are 3 and 1.5 respectively for

accuracy, and 6 and 2 respectively for

high speed.

Figure 53: Alignment Grid, Z height and Acceleration function

● Gridlines - This draws a series of

lines with ticks as determined by the

user specified Grid Spacing and Grid

Ticks parameters.

● Crosshair - This draws a single cross

hair through the centre of the display