VI User Manual.pdf - 第108页
.TST file creation 4 - 34 Vision 2007 4.10 User Manual Re v 01 Case 5 : the component is not define d in the zone file or the zone file is empty. The zo ne edition window is displayed. Adjust the light settings. Click on…
.TST file creation
Vision 2007 4.10 User Manual Rev 01 4 - 33
4.8.4.8 Joker zone manual creation
First step
1. Display the zones.
2. Select the Joker zone icon on the floating menu.
3. Click on the component that require a joker zone.
Case 1: the component is already defined in the zone file as a component associated to
a centered zone. An error message will appear.
Remove the jedec from the zones .dsc file before creating a Joker zone on this component.
Case 2: the component is a component that needed a multi-zone. The operator cannot
create a joker zone on multi-zone component (no message).
Case 3: the compo-
nent is already de-
fined in the zone file
as a component as-
sociated to a joker
zone. An interroga-
tive message will appear
Case 3.1: Click on Yes. The Zone edition window is displayed with the light settings of
the jedec defined in the zone file. Adjust the light settings if necessary.
Click on OK to validate your settings.
Click on UPDATE if you want the zones file to be
updated. An information message will appear con-
firming the re-attachement of the components.
Case 3.2: Click on NO. The zone edition window is displayed with the light settings of the
jedec defined in the default.ini file. Adjust the light settings if necessary.
Click on OK to validate your settings.
Click on UPDATE if you want the zones file to be
updated. An information message will appear con-
firming the re-attachement of the components.
Case 4: the component has already a joker zone defined. The zone edition window is
displayed. Adjust the light settings.
Click on OK to validate your settings, the zones file
is updated with the new Jedec name and its re-
quired light adjustments. The new zone will re-
place the previous one. An information message
will appear confirming the re-attachement of the
components.
Zones creation
.TST file creation
4 - 34 Vision 2007 4.10 User Manual Rev 01
Case 5: the component is not defined in the zone file or the zone file is empty. The zone
edition window is displayed. Adjust the light settings.
Click on OK to validate your settings, the zones file
is updated with the new Jedec name and its re-
quired light adjustments. An information message
will appear confirming the re-attachement of the
components.
Second step if needed
Propagate these settings to the other components of the same Jedec.
1. Go to the pulldown menu Edit\Board\Create Joker zones to open a dialog box that
displays the content of the zone.dsc file. It then show the list of all jedec which have
already been configured with a joker zone.
2. Check the corresponding check boxes for the jedec you want to add joker zones.
Zones creation
Vision 2007 4.10 User Manual Rev 01 5 - 1
Chapter 5
.TST file edition
5.1 .TST file transformation and polarity
5.1.1 . TST file rotation
Once the .tst file has been created, you can make your test file rotate, in Edit menu go to Trans-
formation, choose Rotation sub menu and select 90°, 180° or 270°. The test file will be rotated
and all zones will be re-created.
5.1.2 Automatic Rotation of programs for Vi-1K with camera at 90°
This option allows to rotate automatically test file on Vi-1K with a camera at 90° to insure the
compatibility between offline and online programs.
It is mainly used when a test file is modified on offline machine (Vi-1K with a camera at 90°) and
used for panel inspection on online machine. After this rotation, zones are not recreated and
lighting levels are kept.
This option is available from the defaultValue.ini file by activating the key Temporarily rotation
angle (deg) = 270 in the [Test File] section.
If you have different settings, you have the
opposite message.
.TST file rotation without modification of zones position
To avoid zones re-creation, the user can activate the option rotation of zone before the test
file rotation.
It is mainly used to exchange test files between a Vi-1K with a camera at 90° and a Vi-3K with
a camera at 0°.
After this rotation, the test file can not be executed on the machine type where
the rotation takes place.
.TST file before rotation
.TST file after rotation by 90°