VI User Manual.pdf - 第90页

.TST file creation 4 - 16 Vision 2007 4.10 User Manual Re v 01 It must contains 3 column s (separated by a space):  Reference Designator.  Board num ber.  Feeder informatio n that can cont ains 5 levels separ ated by …

100%1 / 412
.TST file creation
Vision 2007 4.10 User Manual Rev 01 4 - 15
4.5.1.4 Write feeder file to disk window
This last window ask to enter a feeder file result name.
Click finish.
The feeder file is created.
4.5.2 Test file importation
At anytime, you can import the feeder information on your program.
For this, in the Test file menu, go to Import sub menu and select Feeder Information.
The Open a feeder file window appears.
Select the text file containing your feeder information.
Double click on the selected .txt file or click Open to load it.
A feeder file is a text file (ASCII format) containing information on placement machine
for each Reference Designator.
Feeder information
.TST file creation
4 - 16 Vision 2007 4.10 User Manual Rev 01
It must contains 3 columns (separated by a space):
Reference Designator.
Board number.
Feeder information that can contains 5 levels separated by ._..
Usually the 1st level corresponds to the placement machine name. The others are the module,
stat and understat.
After selecting the feeder
file to import, the following
message is displayed:
YES: only the components
of this list to will be on test.
NO: all of the components
will be on test.
Delete the previous feeder information, before loading the present one.
4.5.3 Information result
The feeder information
appears on the compo-
nent edition window.
Feeder information
.TST file creation
Vision 2007 4.10 User Manual Rev 01 4 - 17
4.5.4 Production screen
You can retrieve these levels in the production screen, on the scatter chart.
Selecting one of Machine or Level ... buttons will display the list of the available feeder informa-
tion.
In Machine Level Se-
lection window, select-
ing some of the lines will
only display (on the
scatter chart) the rela-
tive information: compo-
nents placed by
selected machine.
Feeder information