VI User Manual.pdf - 第209页
Tools library Vision 2007 4.10 User Manua l Rev 01 7 - 47 7.9.2.1 Profiler ™ tool window description Global adjustm ent tool Click on Profile 1/2 detection button, the window below appe ars. The window is divided in 4 pa…
Tools library
7 - 46 Vision 2007 4.10 User Manual Rev 01
7.9.2 Profiler™ tool using
Choose the treatment operation: a
new
Custom tab appears behind
the
Model description tab. Click on
it, the window below appears.
1. In the Custom tab, click on Profil-
er 1/2 detection
buttons (A) to
program 2 different Profiler™.
This particularity allows to place 2
Profiler
™
on each lead. For exam-
ple, 1 on lead and 1 on joint or 2
on lead.
2. Choose the Profiler™ mode, tick
Dynamic if you want a dynamic
profile or tick
Fixed if you want a
fixed profile (
B).
A
B
Profiler
™
in Custom
Tools library
Vision 2007 4.10 User Manual Rev 01 7 - 47
7.9.2.1 Profiler
™
tool window description
Global adjustment tool
Click on Profile 1/2 detection button, the window below appears.
The window is divided in 4 parts:
A Creation
B Global adjustment tool profile and result display (Standard mode):
Gradient operator size: level of gradient smoothing
C Global adjustment tool algorithm (Advanced mode)
D The expert mode is only available with Fixed mode
Creation part
A Definition of the Profiler™ size and position.
B Definition of the orientation of the Profiler™.
C D
B
A
D
A
E
D
B
C
Profiler
™
in Custom
Tools library
7 - 48 Vision 2007 4.10 User Manual Rev 01
C Profiler™ adjustment with lead and end of lead, or just with lead or just with end of lead
or on CAD position.
D Definition of the status of profile not found.
E Training and saving of the profile reference.
Global adjustment tool profile and result display
A Area for profiles display.
B Area for gradient display.
C Test all leads result chart:
Lead number
Status: status of lead (good/bad)
NbPtUp/Down
: number of point out of tolerances up/down for profile (
Standard mode
)
NbGradientUp/Down: number of point out of tolerances up/down for gradient
(
Standard mode)
Peak threshold: result of peak threshold algorithm (Expert mode)
Contrast: result of contrast algorithm (Expert mode)
3DAnalysis: result of 3D analysis (Expert mode)
Profiler™ can
be defined in
the length-
ways or width-
ways of the
leads
To measure a profile, a transition on the Profiler
™
area must be detected.
If there are no transition in the profile area, the Profiler
™
is not found. You can
determine if a profile not found is good or not.
Profile in lead lengthways Profile in lead widthways
Lead
Lead axis Sum of grey level
A
B
C
Profiler
™
in Custom